1. Ball screw X and Y axis.
2. 3HP spindle.
3. 18,000 rpm variable spindle.
4. ER20 collect
5. 220V single-phase
2’ x 2’ (24" x 24") working table.
Recommended for sign-makers, hobbyists, molding companies (plastic parts), research and development (R&D) shops, and industrial wood shops.
Powerful 2.95 hp spindle.
Up to 18,000 rpm variable spindle speed.
ER20 collect
Runs on 220-volt single-phase power.
Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.
Stepper motors move the spindle at a maximum speed of 5.3" per second.
Ball screw X and Y axis movement for accurate positioning.
Square slideways clamp the material down and keep it in alignment.
T-slotted clamps fit on the table to hold the material down for clean cuts.
The structurally strong extruded aluminum table won’t buckle under material weight or spindle pressure.
The table ships pre-built with correct alignment for a fast and simple set-up—just an hour or so to uncrate the table and get started with the software.
Rigid cast base and fully-welded steel frame reduce vibrations, so the table can cut correctly over decades of use.
Covered by a 1-year machine warranty.
Spare Parts For Free
Made by this model
| Working area | 2'×2'(24"x24") |
| Spindle speed | 3000-24000r/min |
| Table Size (Length) | 45" |
| Table Size (Width) | 43" |
| Travelling speed (Inches Per Minute) | 197 IPM |
| Working speed(Inches Per Minute) | 157 IPM |
| Reposition Accuracy | 0.08mm (0.0031") |
| Tolerance | 0.15mm (0.0059") |
| Power | 220V Single Phase 60Hz |
| Horse Power | 3 HP (2.2kw) |
| Weight (lbs) | 780 Lbs |
| Table Style | T-Slot |
| Spindle | water cooling spindle |
| Control system | DSP A11 |
| Software suggested | Artcam, UG, AutoCAD, alphacam |
| Command Language | G code, *uoo, *mmg, *plt, *nc |
| Motor | BJC-450A |
| Driver | Leadshine DMA860H |
| Applicable Material | Acrylic, Copper, Aluminum, |
| Wood, PVC,ABS, Insulation Plate, Bakelite Plate, | |
| Honeycomb Plate, Resin, Organic Board, | |
| Aluminum Composite Panel |