About this product
1. Main motor: 7-1/2 HP TEFC,220V,3-phase, Sliding Table Saw
2. Scoring motor: 1.5 HP TEFC
3. Main blade size: 12"
4. Main blade tilt: 0-45°
5. Blade arbor speed: 2800/4000/5600 RPM,3 blade speeds
6. Power up/down and tilting electric drive for parallel fence(accurary ±0.00001"）
- You can choose 3 blade speeds (2800, 4,000, and 5,600 rpm) depending on the hardness and thickness of your material.
- Accepts a huge 14" blade without modification.
- Includes fences for rip cuts, crosscuts and milter cuts. All fences are micro adjustable. Miter fence has two swing stops for repetitive cutting. Aluminum alloy crosscut fence is for miter cutting 45° right and left.
- Digital operation panel allows you to adjust the blade up and down, tilt the blade, adjust the fence and incorporates a digital readout (DRO) for telling you the distance of the fence.
- 1 hp scoring blade spins at 8,500 rpm to ensure a crisp, clean cut without frayed or ripped edges.
- Blade can tilt 45° for miter cutting.
- Includes adjustable riving knife adjustment.
- Scoring blade saves you time. No extra work sanding edges after a cut.
- Sliding table slides on bearing guide system with hardened steel ways for jitter-free motion.
- Table is made of fully-extruded, anodized aluminum that will stay square and true over many years of use.
- Rugged all-steel base stabilizes the machine and reduces vibrations for flawless accuracy and alignment.
- cast steel trunnion.
- Includes a safety blade guard with a tension system for lifting and lowering the guard without moving it from side to side.
- 5"(120mm) main dust port and 3"(80mm) upper dust port let you hook up extraction systems to keep your shop clean.
- Includes magnetic switch with thermal overload protection.
Type |
S350AM |
Sliding Table |
16×126 inch (405×3200 mm) |
Fixed Table |
41.34×25.6 inch (1050×650 mm) |
Motor |
7.5 HP (5.5KW) |
Main Blade |
12 inch(300 mm)/14 inch(350 mm) |
RPM |
2800/4000/5600 |
Depth of cut 90° |
3.15 inch (80 mm) |
Depth of cut 45° |
2.6 inch (65mm) |
Rip Capacity |
49.2 inch (1250mm) |
Scoring Motor |
1.5 HP (1.1KW) |
Scoring Diameter |
0.8 inch (20 mm） |
Scoring Blade RPM |
8500 |
Cut Length |
118 inch (3000 mm) |
Arbor Tilt |
0-45° |
NO.of Dust Outlets |
2 |
Dust Outlets Diameter |
4.7 inch (120mm) & 3 inch (80mm） |
Table Height |
35.4 inch (900 mm) |
Dust Requirements |
1000 CFM |
Electrical |
3 PH / 60Hz / 220V |