※ Heating plate coating
Please take care on handling the heating plate. Keep a certain distance away from heating plate. Cleaning of its surface must be done with surface still warm by using a soft cloth or paper, avoid abrasive materials in that might damage the coating.
At regular intervals check as follows
1) Clean the surface by using a quick evaporation detergent (alcohol)
2) check the tightening of the screws and the cable and plug condition
3) Verify its surface temperature by using infrared-ray scanning
※ milling cutter
It is strongly suggested to keep always clean the blades and wash the pulleys by using a detergent. At regular intervals, carry out a complete cleaning operation.
Type | φ200 | |
Materials | PE,PP,PVDF | |
Max. range of diameter | 63-200 mm | |
Ambient temp. | -5~40℃ | |
Power supply | 220V±10 % | |
Frequency | 50 Hz | |
Total power | 3.55kW | |
Include:Heating plate | 1.8kW | |
Milling cutter motor | 1.0kW | |
Hydraulic unit motor | 0.75 kW | |
Dielectric resistance | >1MΩ | |
Max. Pressure | 4MPa | |
Total section of cylinders | 15.3cm2 | |
Hydraulic oil | 40~50(kinematic viscosity)mm2/s, 40℃) | |
Max. Temperature of heating plate | 299℃ | |
Difference in surface temperature of heating plate | ±3℃ | |
Basic Frame | Size, mm | 790 x 540 x 600 |
Hydraulic Unit | Size, mm | 570 x 480 x 570 |
Total Weight | W.G., kg | 66 |