About this product
1. 80 Amp IGBT pilot arc plasma cutter
2. Automatic dual frequency (50/60Hz)
3.High frequency start and contact start hand torch
4.Suitable for Stainless Steel, Alloy Steel, Mild Steel, and Aluminum, etc.
5.This power source match with straight plasma torch suitable for CNC machine use
Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. MOSFET transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal;PAPST Advanced German Cooling System;Max Severance Thickness: 1 1/2" Inch; Ideal Cut Thickness: 1" Inch.Includes a plasma torch, ground clamp and cable, air regulator, air hose, and air hose connections
Package Includes:
Input voltage | 220-240V,1-PH,50 / 60Hz |
Input Current | 30A |
Duty Cycle @40°C (104°F) | 60%@80A 100%@40A |
Machine Size | 533X305X216mm 21''X12''8.5'' |
Machine weight | 20KG 44 lb |
| Package size | 650X450X350mm 25.6''X17.7''X13.8'' |
| Package weight | 21KG 46.3 lb |
Output current | 20-80A |
Cutting material | Stainless Steel, Alloy Steel, Mild Steel, and Aluminum, etc. |
Cutting thickness | 25.4mm 1'' |
Maximum cutting thickness | 38mm 1.5'' |
Gas supply | Clean,Dry and oil-free gas |
Suggested intake interface and flow/pressure requirements | 4.83cfm@75Psi (minimum pressure 65psi) |
Note:If there is no pressure gas at the work site, customers should purchase air compressors for use in combination with plasma power.
Nozzle(mm) | Current (A) | Material | Thickness (mm/inch) | VSpeed (mm/min) | Arc voltage (V) |
1.3 | 60 | MS | 3.4 10ga | 4200 | 114 |
1.3 | 60 | MS | 6.4 1/4 | 1530 | 115 |
1.3 | 60 | MS | 9.5 3/8 | 730 | 119 |
1.5 | 80 | MS | 4.8 3/16 | 2480 | 116 |
1.5 | 80 | MS | 6.4 1/4 | 1850 | 118 |
1.5 | 80 | MS | 9.5 3/8 | 1050 | 120 |
1.5 | 80 | MS | 12.7 1/2 | 700 | 125 |
1.5 | 80 | MS | 15.9 5/8 | 450 | 128 |
