Features:
● The CUT-50 model is an inverter-based plasma cutting machine which using the latest in MOSFET technology. This machine is portable reliable one with features that you can expect from a quality plasma cutter. The CUT-50 produces a high temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast Iron, stainless steel, copper, aluminium brass etc .
● The CUT-50 is equipped with a high quality pt31 Plasma torch with touch-way to start arc. It is a basic plasma cutting machine suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services.
Package Include:
● 5 metre PT-31 plasma cutting torch x 1
● 2 metre ground cable x 1
● 2 metre hose x 1
● Air filter regulator x 1
● Cutting accessories (electrode,nozzle,swirl ring,shield cup) x 5
● PTFE tape x 1
● Hose clamp x 2
● Brass joint x 2
| Model Spec. | CUT-50 |
| Power supply voltage | 110v/220v |
| Power frequency | 50~60 Hz |
| Power supply capacity | 6.0 kVA |
| Rated input current | 25 A |
| No-load voltage | 250 V |
| Output current range | 20 - 50 A |
| Output voltage | 100 V |
| Duty cycle | 60% |
| Efficiency | 85% |
| Tip hole diameter | 1.1 mm |
| Arc striking model | touch |
| Cosφ (η) | 0.93 |
| Air pressure | 0.3 - 0.45MPa |
| Cutting thickness | 1 - 12 mm |
| 1 - 8 mm | |
| 1 - 6 mm | |
| Air flow | 110 L/min |
| Insulation grade | F |
| Protection grade | IP 21 S |
| Net Weight | 10 kg(22.05lb） |
| Dimensions (mm) | 470 × 160 × 250 |