1. Digital touchscreen controller for the pneumatic heat press machine
2. Aluminum heat plate with die casting heating pipe.
3. Easily adjust the certain pressure, Max. pressure is up to 116psi (0.8mPa).
4. Automatic and manual model switch for your option.
5. Sliding heat plate head design.
6. Dual 16" × 24" workstation for alternative use.
Note:
1,Pre-order: Product will be shipped after production, with a production and shipping lead time of approximately 40-60 days
2,Pre-order price: $1690(below regular selling price)
3,Please contact jiangshidong@toolots.com before placing your order
16" x 24" Pneumatic Heat Press Machine Upper Sliding Heat Press Machine with Double Station
This Pneumatic Heat press machine is featured by its double working table and air automatic working system. It is very efficient for transferring work in the advertising industry and the printing industry. This machine can transfer patterns and texts which are printed by sublimating ink or solvent ink onto fabrics like cotton, linen, chemical fabric, and nylon and ceramics through heat transfer technology. Flock printing and puff printing can also be achieved by this machine. It can be used to fuse cloth too, for example, clothes, caps, and shoes etc.
Product Feature
- Digital Control, makes working procedure complete situation uses signal indication, has high accuracy.
- The radiation pipe and the hot plate in whole, safe, durable, and distribute heat averagely.
- Free to adjust the pressure, widely used in the factory assembly line operation.
- Adopt IC board, touch buttons, electromagnetic switch and ON/OFF timer, providing the elegant appearance and high reliability.
- Stable running on the bottom worktable, deforming free and low noise.
- Automatic control, stable pressure (pressure up to 116psi/0.8mPa).
- Two option running modes for workbench manual and automatic.
- Dual-side pull type workbench saves labor and provides high printing speed.
- Using special security devices, the machine is anti-crushing, safe and rationalized.
FQA
1. Heating is only on the top side? Answer: The heating plate is on the top side only.
2. How many heights does the machine between top and bottom plate? Answer: The height is 2.76" (7cm).
3. Max pressure is that regulator max pressure or actual pressure on the press table?
Answer: Max pressure is up to 116psi (0.8MPa). You can adjust pressure via the regulator and check the actual pressure value on the display.
Product Display
Printing Step
| Model | GS-QD2 |
| Worktable | 16" × 24" (40cm × 60cm) |
| Voltage | 110V-60Hz, 1 phase |
| Power | 2.6kW |
| Current | 23A |
| Time Range | 0-999s |
| Temperature | 0-572℉ (0-300℃) |
| Pressure | 0-116 Psi (0-0.8MPa) |
Warm Tips:
1.You need to prepare one air compressor with a capacity of at least 8 bar.
2.Because the heat press machine current is high, this machine doesn't have any plug for safety, so please connect the wire to the air switch.
Gross Weight: 308.7Lbs
Dimension : 39x36x37 inch
Packing way: 1 set in a wooden case