About this product
Principal Features
1. Turret tool disk opposite side 11.811 in. 8 tools.
2. Use 3 pieces coupling & hydraulic clamp /unclamp system suitable for heavy cutting long term operation.
3. Hydraulic power source: P= 4.5 Mpa
4. Driving source per servo motor drive turning tool disc.
5. Index time per station only needs 0.1 sec. Indexing accuracy: ±4 sec. The accuracy of repeatability: ±2 sec.
1. Designed by the manufacturer，this type turret has been promoting its reliability to meet various market demand.
2. The product is equipped with a servo motor. It features hydraulic oil clamping and release and can rotate in two sides.
3. It features high accuracy, reliability, more load and wide application.
| No. | Item | Unit | Parameter |
| 1 | Center Hight | '' | 3.937 |
| 2 | No. of Working Positions | N | 8 |
| 3 | Max. Interia of Mass | kgm² | 5 |
| 4 | Time for 30° Ratation and Clamping | s | 0.15 |
| 5 | Without Accelerating and Braking per Additional Partial Step | s | 0.09 |
| 6 | Turret Unlocked or Locked | s | 0.13 |
| 7 | Perm. Indexing Frequency (Median Switching Angle φM) | r/min'' | 16 |
| 8 | Perm. Tangential Load (Turret Locked) | kNm | 3.5 |
| 9 | Max Unbanlanced Load Torque | Nm | 63 |
| 10 | Indexing Accuracy | Sec. | ±4" |
| 11 | Repeatability Accuracy | Sec. | ±2" |
| 12 | ±10% Hydraulic Operating Pressure | Mpa | 4.5 |
| 13 | Operating Pressure for Cooling Lubricant | Mpa | 0.5-2.5 |
| 14 | Max. Weight | lb. | 312 |