1. Tool disk opposite side 14.96 in.12 tools.
2. Tool shank specifications: ￠65 ER25
3. Max tool speed 4000 rpm.
4. Hydraulic power source: P= 5.0 Mpa
5. There is need 0.1 sec. only with speedy rotation time (adjacent), Indexing accuracy: ±4 sec. Accuracy of repeatability: ±2 sec.
6. Spindle Motor can be changed according to differenct controller model such as SIEMENS and MITSUBISHI.
These turrets are suitable for use for forward and reverse turning machining.
They are equipped with all of the features and functions of modern high-performance tool turrets.
They are suitable for series manufacture due to their robust design and short switching times.
1. Drive with controllable electric motor for very fast bidirectional use of servo motors.
2. Short cycle times due to excellent turret control.
3. Reduce withing requirement.
4. High degree of stability due to high locking forces.
5. Hydraulic locking with special triple generating crown gear (pat).
6. Directly controllable by machine controller.
| No. | Item | Unit | Paramerter |
| 1 | Center Hieght | '' | 48 |
| 2 | No. of Working Positions | N | 12 |
| 3 | Perm. Tangential Load (Turret Locked) | kNm | 7 |
| 4 | Time for 30° Ratation And Clamping | s | 0.2 |
| 5 | Without Accelerating And Braking Per Additional Partial Step | s | 0.13 |
| 6 | Turret Unlocked Or Locked | s | 0.13 |
| 7 | Perm. Indexing Frequency (Median Switching Angle φM) | min-1 | 12 |
| 8 | Max Unbanlanced Load Torque | Nm | 63 |
| 9 | Indexing Accuracy | Sec. | ±4" |
| 10 | Repeatability Accuracy | Sec. | ±2" |
| 11 | Gear Speed Radio for Rotating | 1:72 | |
| 12 | ±10% Hydraulic Operating Pressure | Mpa | 5.0 |
| 13 | Hydraulic Cylinder Clamping Force | kgs | 6860 |
| 14 | Operating Pressure for Cooling Lubricant | Mpa | 2.5 |
| 15 | Gear Speed Radio for Power Tool | 1:1 | |
| 16 | Tool Holder Size | BMT65 | |
| 17 | Perm. Speed on Tool Drive Coupling | rpm | 4000 |
| 18 | Net Weight | lb. | 440 |