About this product
1. T.I.R. ≤ 0.0002" at collet face
2. Rear thread for pull stud M16 × 2
3. Balanced to 30,000 RPM @ G2.5
4. Gage length is 2-3/4" (70mm)
5. Tool holder use coating technology
6. Include retention knob and collet nut
7. Works on BT40 spindle woodworking machines
1. T.I.R. ≤ 0.0002" measured from taper to collet pocket.
2. Collet chuck accepts all ER32 collets.
3. This tool holder has been tested for dynamic balancing.
4. High torque collet nut.
5. Precision ground taper surfaces provides high accuracy.
6. The tool holder adopts coating technology, which is better for waterproof and rustproof.
SKU | BEST105A | T.I.R. | ≤ 0.0002" |
Taper Size | BT40 | Max. RPM Balanced to | 30,000 @G2.5 |
Collet Series | ER32 | Drawbar Thread Size | M16 × 2 |
Collet Range | 3/64" - 25/32" 1-20mm |
Thru Coolant | No |
Nut Diameter (d1) | 1-31/32" 50mm |
Material | 40Cr |
Projection Length (L1) | 2-3/4" 70mm |
G.W. | 3 lbs. |
Overall Length (L2) | 5-13/32" 137.4mm |
Meas | 6-11/16" × 3" × 3" |