About this product
Bolton Tools A0202006 Shell Mill Holder BT40-SM11/4-5.00
BT40-SM Shell Mill Holder Specification:
- Finish: Black Oxide
- Runout: .005mm/.0002in TIR
- Works on all BT 40 machines
- All critical tool holder surfaces precision ground
- Made from alloy structural steel hardened to 48 - 52rc
- 8000 rpms
- Rear thread for pull stud is M16
Order Number | TYPE | L | L1 | L2 | D | d | K1 | K2 | $ |
---|---|---|---|---|---|---|---|---|---|
A0202001 | BT40-SM3/4-1.77 | 5.03 | 1.77 | 0.687 | 1.75 | 0.75 | 0.178 | 0.312 | $41.50 |
A0202002 | BT40-SM3/4-4.00 | 7.26 | 4 | 0.687 | 1.75 | 0.75 | 0.178 | 0.312 | $41.50 |
A0202003 | BT40-SM1-1.77 | 5.13 | 1.77 | 0.787 | 2 | 1 | 0.178 | 0.375 | $41.50 |
A0202004 | BT40-SM1-4.00 | 7.36 | 4 | 0.787 | 2 | 1 | 0.178 | 0.375 | $41.50 |
A0202005 | BT40-SM11/4-2.36 | 5.8 | 2.36 | 0.866 | 2.56 | 1.25 | 0.263 | 0.5 | $41.50 |
A0202006 | BT40-SM11/4-5.00 | 8.44 | 5 | 0.866 | 2.56 | 1.25 | 0.263 | 0.5 | $45.10 |
A0202007 | BT40-SM11/2-2.36 | 5.94 | 2.36 | 1 | 3.15 | 1.5 | 0.35 | 0.625 | $41.50 |