Double sides laminating

3 working model

    Model 1: Auto              Continuous Feeding depends on sensor

    Model 2: Manual 1      Testing Mode  Press Start every sheet

    Model 2: Manual 2      Press Start only first sheet

Quicker guide positioning

Press-move-release-positioning

 Auto perforation on film

Earily tera off or seperation after perforation

Auto Teeth Blade

Teeth blade patent for paper auto separation

Anti-curl technology

18 levels anti-curl for different materials

Laminating pressure adjustment be fit for each different requirments

Cold laminating device, tension adjustment

Safety caution:
Be care to use this machine, don't put the hand or another body to running part of the machine. which avoid any accident. Kindly see more using, maintenance caution as below
1. Put the machine on the solid and air circulate place
2. According the mechanical rear instruction to connect the power. If the voltage is too lower or higher .the machine will run abnormally.
3. Ensure your safe, please use the earthed power socket
4. Don't put several electric in one socket, because if overload will be caused to fire or electric shock.
5. Before clean the machine, please take off the power.
6. Heating roller temp. is over 130℃. So don't touch the heating roller when using or power off in a short time.
7. Don't put irrelevant things into the laminator.
8. Don't touch the heating roll and film surface, or the film will be adhered to the roller and difficult to clean.
9. Don't repair the laminator by yourself. If problem, kindly connect the agent.