- Walk-Behind
- 1–Hard aggregate
New England Diamond – Cured Concrete
NECA 1 – Premium Segmented Blade
Size: 18” x .125” x 1”
Part No. 0301A1803
Uses: wet use, high hp walk-behind saw, low hp walk-behind saw
Features: Walk-Behind, 1–Hard aggregate
Diamond Blade Basics
Diamond blades contain industrial-grade diamond embedded in segments or rims on their cutting edge. As the blade is used, the abrasive qualities of the material being cut (such as concrete) wears down the segment. Diamond crystals either get crushed or let loose as the metal matrix gets worn away, exposing new diamonds to continue the cutting.
Diamond Blade Cutting Depth & Speed
The actual cutting depth may vary depending on a number of factors, including the exact blade diameter, the exact flange diameter, saw components, etc. Warning: Operating at greater than the max RPM can cause blade damage, which may cause injury.
Blade Size (in.) |
Cutting Depth by Application (in.) |
Speed |
|||||
Flat Saw |
Wall Saw |
Masonry |
High Speed |
Tile |
Rec. RPM |
Max. RPM |
|
4 |
- |
- |
- |
- |
3/4 |
9072 |
15000 |
4 1/2 |
- |
- |
- |
- |
1 |
8063 |
13300 |
5 |
- |
- |
- |
- |
1 1/4 |
7257 |
12000 |
6 |
- |
- |
- |
- |
1 3/4 |
6048 |
10185 |
7 |
1 1/2 |
- |
- |
- |
2 1/4 |
5184 |
8730 |
8 |
2 |
- |
- |
- |
2 3/4 |
4536 |
7640 |
9 |
- |
- |
- |
- |
3 1/4 |
4032 |
6790 |
10 |
3 |
- |
- |
- |
3 3/4 |
3629 |
6115 |
12 |
3 5/8 |
- |
- |
- |
- |
3024 |
5095 |
12HS* |
- |
- |
- |
4 |
- |
- |
6300 |
14 |
4 5/8 |
4 5/8 |
5 |
- |
- |
2592 |
4365 |
14HS* |
- |
- |
- |
4 5/8 |
- |
- |
5460 |
16 |
5 5/8 |
- |
6 |
- |
- |
2268 |
3820 |
16HS* |
- |
- |
- |
6 |
|