The ultrasonic cleaning machine uses the super audio signal higher than 28kHz, which is converted into high-frequency mechanical vibration by transducer, and then it is introduced into the cleaning liquid. The ultrasonic wave radiates forward in the cleaning liquid, making the liquid flow and produce tens of thousands of tiny bubbles. These bubbles grow in the negative pressure area formed by the longitudinal propagation of the super sound wave, and close rapidly in the positive pressure area The formation, growth and rapid closure of bubbles are called cavitation phenomena. In the cavitation phenomenon, the closure of these bubbles forms an instantaneous high pressure of more than 1000 atmospheric pressure. The continuous instantaneous high pressure is like a series of small "explosions" that constantly bombard the surface of the object, making the dirt on the surface of the object and in the gap peel off rapidly, achieving the rapid cleaning effect.

"BoLe ultrasonic" series ultrasonic cleaning machine uses clean water and environment-friendly water-based solvent as cleaning agent. It is mainly used for cleaning parts before and after electroplating, and precision cleaning of clocks and watches, jewelry, hardware machinery, auto parts, lens silicon, spectacle frame, glassware, electronic hardware stopper, PCB, semiconductor and other parts. 

1. All imported stainless steel structure, acid and alkali resistant, durable; 

2. The adhesive imported from Switzerland and special technology are adopted to ensure that the transducer can work at 100 ℃ for a long time; 

3. Unique digital control technology, IGBT mode power supply, strong ultrasonic output, continuous adjustable power; 

4. The unique ultrasonic automatic tracking technology makes the ultrasonic automatically keep consistent when the load changes; 

5. Equipped with digital time display, the working time is adjustable from 0 to 30min, accurate to seconds; 

6. Equipped with solvent heating and automatic constant temperature device, accurate temperature control. 

1. Don’t plug in the machinewith empty tank – be sure to fill in proper amount of liquid before plug-in themachine. Otherwise, the heater could be damaged.

2. Never run the machine withlow level of liquid to avoid damaging ultrasonic transducers and heater.

3. Please note that when yourun heater, the liquid in the tank could vapor in the long time period, pleasekeep watching the level of the liquid in the tank

4. Washing liquid spatters into the shakerresults in creepage and short circuit, and burn the wafer as well.

5. Electrical abnormity will burn the transistor.

6. High voltage brings damages to thecircuit and indicating lights etc.