About this product
1. Capacity is 573 lb
2. Effective machine volume: 318 ft3
3. Diameter of end disk is 25.6"
4. Productivity: 17857.5 lb/hour
5. Abrasive flow rate: 298 lb/min
6. efficiency 99.9% dust removal
1. Whole structure design. 3-phase electric connection can work. No need to debug.
2. Machine chamber use Mn13 plate. Small gap between rotary plate and side plate.
3. Air pressure pulse dust collector. Filter area 323ft². Dust discharge ≤ 10mg/m³.
4. Multiple seal. No steel ball fly out from the machine.
5. Blast wheel motor is 10HP. Investment casting(lost wax) wear parts. Surface HRC 62-65. Long life. Dynamic balance test. Lower noise.
6. Capacity 573 lb.
7. Size L × W × H is 76.7" × 76.7" × 100.4".
8. Worm gear reducer. More safety and stabilization.
9. Famous brand of electronic pneumatic component and mechanical parts. Lower failure rater and longer life.
Effective Machine Volume | 318ft3 |
Diameter Of End Disk | 25.6" |
Distance Between The Barel Heads | 35.4" |
Maximum Recommended Weight Of Single Work-Piece | 22lb, with a maximum load capacity of 537lb |
Blastwheel | 10hp blastwheel with a diameter of 14.2" |
Footprint | 78.7"(wide) x 70.9"(deep) x 102.4"(tall) |
Electric Control System | Operator control panel |
Operating Voltage | 460V, 60 Hz |
Phase - Electrical | 3-phase |
Abrasive Flow Rate | 298 lb/min |
Productivity | 17857.5 lb/hour |
Rotating Speed Of The Barrel | 14 r/min VFD |
Velocity | 1.46 inch/sec |
Media Cleaning/Recycling System | Bucket elevator with airwash separator |
Initial Media Charge | 331lb |
Power Consumption | 17hp |
Mechanical Shaking Bag Type Dust Collector | 2 pcs Bags with dimensions of 12.8" diameter x 39.4" long |
Dust Particle Size | 0.5 micron (.005mm) |