- It can stir and react under the natural pressure or negative pressure in the sealed reactor.
- The evaporating and reflowing of the reacted solution is controlled.
- The material can be emptied from the outlet valve at the bottom of the reactor after reacting.
- It is easy to operate.
- The reactor is the ideal instrument for experiment of modern chemistry, biochemical, pharmacy and the advanced synthetic.
- Power: 220V 60HZ
The reactor is operated as follow:
Pour the constant temperature solution ( heating or cooling ) between the jacketed-glass of the reactor.It can stir and react under the natural pressure or negative pressure in the sealed reactor.
The evaporating and reflowing of the reacted solution is controlled.
The material can be emptied from the outlet valve at the bottom of the reactor after reacting.
It is easy to operate.
The reactor is the ideal instrument for experiment of modern chemistry, biochemical, pharmacy and the advanced synthetic.
Detail of Jacketed Glass Reactor RAT-20Dse:
|
|
|
|
Gear Motor(3:1):Variable frequency and variable speed motor,3:1 geared motor for stirring the high viscosity material, low temperature rise, low noise, large torque,high speed, high efficiency, energy saving,no spark, long life.Digital stir-speed control
Distilling&reflowing&receiving parts:High quality GG-17 glass,Large condensation area design,high effcient recovery convenient interfaces for circulate water and vacuum pump,Equipped with feeding flask(3L),receiving flask(5L),Easy to operate.
Cover of the reactor:Equipped with bearing made by rare earth, mechanical seal, each interface is flange, it is stable. Engineering Plastics nuts can resistant to chemicals and solvents.
PTFE Outlet Valve:No dead space design, any material can be easily removed, very convenient.Parts Diagram for Jacketed Glass Reactor RAT-20Dse:
Model | RAT-20Dse | |
| Volume (L) | 20 | |
| Power Of Motor (W) | 180 | |
| Speed (r/min) | 100 ~ 650 | |
| Torque (g.cm) | 28000 | |
| Cover | Middle (for mixing) | Ø60 |
| Front (for temp. sensor) | Ø50 | |
| Behind (for liquid materiel) | Ø50 | |
| Left (for solid materiel) | Ø50 | |
| Right (for distillation) | Ø50 | |
Measurement (in.) | 35 × 26 × 77 | |
| Seal For Middle | Rare earth bearing + mechanical seal (SiC-SiC) | |
| Seal For Flange | PTFE seal + PTFE nuts | |
| Bracket | 304 stainless steel | |
| Diameter of Middle (mm) | 14 | |
| Material of Middle | 304 stainless steel with PTFE coat outside | |
| Type of Middle | anchor / propeller | |
| Feeding Flask (L) | 3 | |
| Receiving Flask (L) | 5 | |
| Condenser (M²) | 0.5 | |
| Type of Outlet | glass - PTFE valve | |
| Connector For Circulation | glass connector + PTFE | |
Packing list:
Description | Qty | Refer to "Parts Diagram" | |
| stainless steel base-frame system | 1 pc | 18) | |
stainless steel pole Ø51-frame system(vertical) with 4 sliding dowel blocks | 51-25 ×1 for motor 51-20 ×1 for connect to poleØ20 51-20 ×1 for support the reactor bottle 51-20 ×1 for bearer carier | 1 set | 8) |
stainless steel pole Ø30-frame system(vertical) with 6 sliding dowel blocks | 30-8 ×1 for support the top of condenser 30-8 ×1 for support the top of feeding flask 30-15 ×1 for support the bottom of condenser 30-15 ×1 for support the bottom of feeding flask 30-20 ×1 for connect to right of the poleØ20 30-15 ×1 for support the bottom of receiving flask | 1 set | |
stainless steel pole Ø20-frame system(horizontal) with 2 sliding dowel blocks | 20-20 ×1 for frequency controller 20-15 ×1 for vacuum gauge | 1 set | |
| Motor & universal joint | 1 set | 3)5) | |
| Frequency controller | 1 set | 7) | |
| Vacuum gauge | 1 set | 4) | |
| Jacketed glass reactor bottle | 1 pc | 14) | |
| Cover and sealing unit | 1 set | 9) | |
| Stainless-PTFE stiring paddle & connector | 1 set | 6)15) | |
| PTFE outlet valve | 1 set | 17) | |
| Clamps for jacketed glass reactor bottle | 1 set | 11) | |
| Clamps between bottle and cover | 1 set | 10) | |
| Vertical condenser | 1 pc | 2) | |
| Feeding port for solid materials Ø50 with PTFE open/close valve | 1 pc | ||
| Glass tube for temperature sensor Ø50 | 1 pc | 13) | |
| Feeding port for liquid materials Ø50 with PTFE open/close valve | 1 pc | ||
| Engineering plastics Screw Nuts for connections | 7 sets | ||
| Gaskets for connections | 7 pcs | ||
| Distillation bends (two pieces,ball joint) | 1 set | 19) | |
| Four-way valve | 1 pc | 19) | |
| Glass feeding tube(19#) with glass open/close valve | 1 pc | ||
| Condenser holders | 1 set | ||
| 3L Feeding flask & holder | 1 set | 1) | |
| Bearer carier for jacketed kettle | 1 pc | 16) | |
| 5L Receiving flask with detachable drain port | 1 pc | 20) | |
| Use manual | 1 set | ||
| Spare parts bag: | |||
| fuse(5A) | 1 pc | ||
| spanner(6mm) | 1 pc | ||
| O sealing ring Φ 40 x 2.65 | 1 pc | ||
| framework oil seal | 1 pc | ||