1. Inlet temperature ≤ 80 ℃ (176 ℉)
2. Outlet temperature : 30℃~40℃(86℉~104℉)
3. Environment temperature ≤ 40 ℃ (104 ℉)
4. Installation environment : good ventilated ,dust-free,greaseless area ,32 in. far away from the wall
Introduction
Highly efficient product which is made of corrugated metal pieces. The heat exchange
is processed by the plate. Compared with the conventional shell and tube type heat exchanger, under the same rate of the flow
resistance and pump power consumption, the heat transfer coefficiency is much higher.
Technical Upgrade
★ Ambient Temperature ≤ 104 ℉
★ Inlet Temperature ≤ 176 ℉
Attention
The installation site No-dust, No-Oil. Site formation, 32 in. far away from the wall. According to the design of non-standard customized products.
Flow capacity | 25CFM (Pressure P=101.33kPa, Temperature T=68℉ ) | |
Design parameters | Inlet pressure | MAX232psi |
Inlet temperature | ≤113℉ | |
Dew point | 35.6-50℉ | |
Ambient temperature | ＜100.4℉ | |
Refrigeration system | Refrigerant compressor | BSA645CW |
Refrigerating capacity | 878W (evaporation temperature44.96℉, condensation temperature129.92℉ | |
Refrigerant type | R134A | |
Refrigerant weight | 0.77lb | |
Condenser | plate fin type | |
Evaporator | Stainless steel plate fin type | |
Power system | Voltage | AC1Φ 115-120V60Hz |
Power | 0.28kW | |
Refrigerant compressor | 1/3 HP | |
Connect | Compressed air | NPT 1/2" |
Drainage | Φ8 | |