About this product
1. Angle body piston valves: DN50, G threaded, 2" |
2. Angle body piston valves is made of stainless steel 304 |
3. Angle valve: Normally closed |
4. Single acting (spring return) and double acting universal |
5. Angle seat valve input port: G1/4" |
6. Plumbing valve seat seal; PTFE |
Angle body piston valves handle water, light slurries, and steam. They have a cold-rolled stainless steel shaft, spring-loaded stem seal, and heat-resistant fluoroelastomer shaft wiper.
PA actuator, single/double acting alternative
PTFE valve seat sealing
Transparent position indicator
- Material Chart
- Ordering Code
- Dimensions
- Application Tips:
- Double acting: suitable for 5/3 way solenoid pilot valve
- Single acting: suitable for 3/2 way solenoid pilot valve
- Flow direction: our valve is bi-directional for flow entrance.
The medium can either go along or agains the arrow indication on valve body. Double acting control is recommended if the medium goes against the arrow to ensure best performance of the valve.
- Double acting: suitable for 5/3 way solenoid pilot valve
- Single acting: suitable for 3/2 way solenoid pilot valve
- Flow direction: our valve is bi-directional for flow entrance.
fillout the form
Pipe size inch | 2" |
Min. operating pressure differential | 0 psi |
Max. operating pressure differential steam | 150 psi |
Max. operating pressure differential water | 240 psi |
Co-efficient of volume | 2.3 |
Body material-valve | stainless steel 304 |
Environmental ratings-valves | indoor, outdoor |
Media-valves | Air, inert gases, water, light slurries, oil |