About this product
1. Cooled air ,lubricating oil ,standard type.
2. 2840rpm motor speed.
3. 300 Bar / 4300 Psi working pressure.
Splash lubrication
Oil sump content: 0.3 L
Intake filter element
Setting cooler after every compressed
After compresses gas through the cooler ,and its temp is higher around 10-15°C then the ambient temp
Intermediate oil/water separators after each stage (except 1st stage)
Final Oil/water separator
Final pressure safety valve
Setting Pressure maintaining valve before compressor exported
First oil filling with final test
Arrangement of the unit on solid base frame
Drive : V-Belt
High pressure outlet: fitting 8S for pipe 8mm
| Model | NRX6 |
| Type | Cooled air ,lubricating oil ,standard type |
| Driver | Single phase electric motor 110V 60Hz |
| Power | 3HP |
| Motor speed | 2840rpm |
| IP Grade | IP55 |
| Filling time | 6.8L 300bar/21min |
| 12L 200bar/25min | |
| Displacement | 3.5CFM |
| Working pressure | 225 Bar / 3300 Psi |
| 300 Bar / 4300 Psi | |
| Grade | Four stage compressed |
| Medium | air ,nitrogen,natural gas etc Intake |
| Intake temperaure range | 5～45℃ |
| Operation temperature range | 60～90℃ |
| Cooling gas requirments | 706CFM |
| Lubricating oil | Nengyuan compressor own oil/Rui Fu food grade Lubricating |
| Lubricating filling amount | 300 cc / 10 FL. OZ |
| Host speed | 2300rpm |
| Noise | ＜ 78 dB(A) |
| N.W | 99 lb |
| Oil-water separator | The last stage of oil-water separator |
| Filter | Active carbon and molecular sieve filters |
| Breathing air standard | EN12021 EN standard |