About this product
1.Voltage:208-230 / 460 Volt AC
2.Capacity: 42 CFM
3.Working Pressure: 125 psi ; Max Pressure Rating: 150 Psi
4. Motor Power: 10HP.
5.Pump Drive: Belt Drive
6.Dimension L-W-H: 63.1‘’(1605mm) - 27.6"(700mm) - 57.1" (1448mm) .Packing Weight: 869 lbs .
7.Starting current : 72~128A(230A）; 33.6~69.3A ( 460A )
Two Types of Voltage
The air compressor contains operating instructions that allow the customer to change the voltage and adjust the voltage of the air compressor according to their respective conditions.
1.Ultimate efficiency with reduced noise
2.Long life cycle due to increased bearing dimensions and wear-free ROLLING PROFILE
3.Quality assurance – bench test of every air end before leaving factory
Precision filte & Automatic Drain Valve
① Class C Precision filte — Primary pre-filter function: remove solid particles with a diameter of more than 5um.
② Class T Precision filte — degreasing filter function: remove solid and liquid particles with a diameter of more than 1um.
③ Class A Precision filte — high-precision filter function: remove solid and liquid particles with a diameter of more than 0.1um, so that the amount of residual gas at the outlet does not exceed 0.01mg / m3
④ Automatic Drain Valve — Automatic drainage without manual
| Motor | |
| Voltage | 208-230/460 Volt AC |
| Starting current | 72~128A ( 230A ) ; 33.6~69.3A ( 460A ) |
| Phase | 3-Phase |
| dBA | Less than 63 dB(A) |
| Engine | |
| HP | 10 |
| Specification | |
| Capacity (CFM) @ 125 PSI | 42 |
| Max Pressure Rating (PSI) | 150 |
| Pump Drive | Belt Driven |
| Pump Type | Oil Injected Rotary Screw |
| Tank | |
| Air Tank Configuration | Horizontal |
| Tank Size | 69 Gallons |
| Automatic Drain Valve | Yes |
| Accessories | |
| Air Dryer | Yes |
| Air Filter | Yes |
| Outlet Diameter | |
| Diameter | G3/4 |
| Dimensions & Weight | |
| Dimensions (L)(W)(H) | 63.1‘’(1605mm) - 27.6"(700mm) - 57.1" (1448mm) |
| Height (inch) | 57.1" |
| Length (inch) | 63.1‘’ |
| Width (inch) | 27.6" |
| Weight (lbs) | 869 lbs |