1. Capacity: 56cfm (1.6Nm3/min)
2. Working pressure: 101 ~ 145psi (7 - 10bar)
3. Air loss: ≤14.5%
4. Voltages: 220V / 1PH / 60HZ
5. Dew point: ≤ - 40℉
6. Connection: 1"
7. Warranty: 1year, please note that element and drainer is consumables, not covered by the warranty period
Anti-explosion Heatless Regenerative Desiccant Air Dryer
Descriptions
KXD Series Heatless cmpressed Air Dryer is a kind of simple, reliable and economical method for removing water vapor from compressed air. The normal outlet pressure dew point is -40℉, lowest pressure dew point can be -94℉.
the KXD Series Heatless comprssed Air Dryer is ideal for applications where compressed air lines are exposed to blew zero ambient temperatures, or where special processes require air at an extremely low relative humidity. This unit provides instrument quality air and is designed for maximum reliability and long, trouble-free service.
the KXD Series Heatless regenerative Air Dryer is based on pressure-swing-adsorption technology. There are two desiccant towers filled with activated alumina, as saturated air flows up through the tower , its moisture content adheres to the surface of the activated alumina beads. The dry air is then discharged from the tower into the distribution system.
After 5 minutes of operation on one tower the flow is switched to the other tower through the use of a timed system of directional valves. A portion of dried compressed air is diverted through an orifice, expanded to atmospheric pressure, and directed into the regenerating tower, where the moisture accumulated during the drying cycle is stripped off and purged to the atmosphere.
Standard Features
Reliable Timed controller Field-proven over time, this design and technology maintain precise control over all switching and purge valve functions.
High quality desiccant High quality, extra quantities of activated alumina is respectively filled in each tower.
Pressure Gauges Located on each tower, provide visual indication of pressure during drying and regeneration processes.
Features:
Using high-capacity design, and ensure device a stable export Dew Point to adopt the physical ageing and operational load changes;
Key components adopt domestic and foreign famous brand , and ensure continuous and reliable operation of devices;
Overall assembly identification, so that devices have advanced.
Optional Configuration:
1. Molecular sieve
2. Dew Point cut over model
3. High Dew Point police, chain
4. Front and rear filters installed in the whole sets
5. LCD, Configurate computer communications interface
Specification:
Pressure: 58 ~ 159 psi
Rated inlet air tepm. < 113℉
Air loss ≤ 14.5%
System pressure drop < 3psi
Switch cycle 5-10min
Desiccant Activated alumina
Item |
Air Dryer |
Model |
KLKXD-10 |
Max. Flow |
56CFM |
Max.Inlet Temp. |
113 Degrees F |
Max. Incoming Pressure |
200psi |
Connection |
1'' |
Air loss |
≤14.5% |
Drain Port Size |
1/2" |
Dew point |
≤ - 40℉ |
Desiccant |
Activated alumina |
Dimensions |
27.17 × 19.69 × 51.1 inch |
Housing Material |
Aluminum Alloy |