1. Dehumidifying & Drying & Loading, Drying Hopper Capacity: 110 lbs / 50 kg
2. Supplying dry air machines with low dew point of -104℉ / -40 ℃
3. Heater Power: 5.23 hp / 3.9 kW
4. Blower Power: 1 hp / 0.75 kW
5. Regeneration Heater Power: 5.1 hp / 3.8 kW
6. Regeneration Blower Power: 0.33 hp / 0.25 kW
7. The diameter of the hoses is 2 inch/51mm
Features:
1. Supplying dry air machines with low dew point of -40 °, Integrated dehumidifying & drying & two- section conveying functions in one unit.
2. Beautiful appearance, simple and reasonable design and easy for maintenance.
3. Suitable for hygroscopic engineering plastics, such as PA, PC, PBT, PET, ABS etc.
4. P.I.D. Temperature control system, which can precisely control dryness and regeneration temperature;
5. Insulated container of stainless steel and wind-blowing from the bottom guarantees no heat loss, stable drying temperature and efficiency;
6. Fully closed feeding system, that prevents materials from absorbing moisture after being dried.
7. Clients can choose, based on their actual needs, one to one, one to two or two to one models, and all of which Combine dehumidifying, drying and two section -feeding.
Install schematic
| ITEM | UNIT | Model-STT - 50 |
| Drying Hopper Capacity |
lbs Kg |
110 50 |
| Drying Air Capacity | cuft / hr m³ / hr |
2825 80 |
| Heater Power |
hp kW |
5.23 3.9 |
| Blower Power |
hp kW |
1 0.75 |
| Regeneration Heater Power |
hp kW |
5.1 3.8 |
| Regeneration Blower Power |
hp kW |
0.33 0.25 |
| Pipe Diamenter |
Inch mm |
3/4 19.05 |
| Voltage | 440/460/480V, 3 phase, 60HZ |