1. Max output: 3300-4500 lbs/hr.
2. Cutting chamber: 59.06×32.28 inches.
3. Screen size: 63/64 inch (25 mm).
4. Robust Construction for a long operating life.
5. Low noise level - Low Dust Generation on engineered plastics.
1. Designed for Beside the Press and General Purpose Operation
2. Low noise level - Low Dust Generation on engineered plastics
3. Robust Construction for a long operating life
4. Minimal floor space
5. A long time service. Complies with CE Standards
Type |
|
QE70150P |
Motor Power |
HP |
150 |
Rotating speed |
Rpm |
275 |
Material of blades |
|
SKD-11 |
Quantity of Rotating Blades |
Pcs |
3×6 |
Quantity of Fixed Blades |
Pcs |
2×4 |
Cutting chamber |
inch |
59.06×32.28 |
Max. Output |
lbs/hr |
3300-4500 |
Regrind Conveyor |
|
o |
Cooling Device |
|
√ |
Full-receiver alarm device |
|
o |
Feed hopper with magnet |
|
o |
Dust separator |
|
o |
Weight |
lbs |
24000 |
Screen size |
inch mm |
63/64 25 |
Dimensions |
inch |
116.54×98.82×147.64 |
Voltage |
Options: a. 230V ± 10% ,3 phase, 60 Hz; b. 460V ± 10% ,3 phase, 60 Hz; c. 110V, 3 phase, 60 Hz |
Features:
· The whole machine is made of stainless steel.
· Its compact and sturdy construction decides its function would not be affected by long term usage.
· Heavy burden type bearing with oil-sealed device and soundproof ply can keep the unit from shocking and noise, and prevent the material from pollution.
· Equipped with protective device for motor and chained power-off system to ensure safe operation, and also equipped with protective device for the safe cleaning.
· Blade are made of imported material, SKD11, through special manufacture process and heat treatment, the blades become more durable.
· Special paddle blade designs can crush any hard or soft material extremely easier.
· Adjustable blade can be sharpened up while blunt and reused to prolong its life.
· The separation design of the crushing chamber and material bin allows the mesh screen to discharge and clean easily.
· QE70150 has a unique cooling water cycle system, which transfers the heat produced to outside area,can prevent granulated material from lumping efficiently.
. QE70150 granulators have hydraulic controller for feeding –hopper and hydraulic change screen.
Optional Features
s Conveyor belt
s Full-receiver alarm device
s Feed hopper with magnet
s Dust separator
s Air blower
Typical Applications
s Injection molded runners and reject parts
s Blow-molded parts and tops/tails
s Extruded tubes and profiles
s Edge trims from sheet extrusion
s Wooden
s Film and woven bag
s Foam, fibres and composite materials
Cutting chamber:
- A ø 28inch"
- B 41 ½ -59 ⅛ inch"
Models: QE70150P