1. Max output: 1900-2900 lbs/hr.
2. Cutting chamber: 37.8×20.47 inches.
3. Screen size: 63/64 inch (25 mm).
4. Robust Construction for a long operating life.
5. Low noise level - Low Dust Generation on engineered plastics.
QE Series Granulators
|
Type |
|
QE50100P |
|
Motor Power |
HP |
60 |
|
Rotating speed |
Rpm |
410 |
|
Material of blades |
|
SKD-11 |
|
Quantity of Rotating Blades |
Pcs |
3×3 |
|
Quantity of Fixed Blades |
Pcs |
2×3 |
|
Cutting chamber |
inch |
37.8×20.47 |
|
Max. Output |
lbs/hr |
1900-2900 |
|
Regrind Conveyor |
|
o |
|
Cooling Device |
|
√ |
|
Full-receiver alarm device |
|
o |
|
Feed hopper with magnet |
|
o |
|
Dust separator |
|
o |
|
Weight |
lbs |
9259 |
|
Screen size |
inch mm |
63/64 25 |
|
Dimensions |
inch |
77.95×66.93×99.80 |
|
Voltage |
Options: a. 230V ± 10% ,3 phase, 60 Hz; b. 460V ± 10% ,3 phase, 60 Hz; c. 110V, 3 phase, 60 Hz |
|
Features:
·The whole machine is made of stainless steel.
·Its compact and sturdy construction decides its function would not be affected by long term usage.
·Heavy burden type bearing with oil-sealed device and soundproof ply can keep the unit from shocking and noise, and prevent the material from pollution.
·Equipped with protective device for motor and chained power-off system to ensure safe operation, and also equipped with protective device for the safe cleaning.
·Blade are made of imported material, SKD11, through special manufacture process and heat treatment, the blades become more durable.
·Special paddle blade designs can crush any hard or soft material extremely easier.
·Adjustable blade can be sharpened up while blunt and reused to prolong its life.
·The separation design of the crushing chamber and material bin allows the mesh screen to discharge and clean easily.
·QE50100P has a unique cooling water cycle system, which transfers the heat produced to outside area,can prevent granulated material from lumping efficiently.
Optional Features
s Conveyor belt
s Full-receiver alarm device
s Feed hopper with magnet
s Dust separator
s Air blower
Typical Applications
s Injection molded runners and reject parts
s Blow-molded parts and tops/tails
s Extruded tubes and profiles
s Edge trims from sheet extrusion
s Wooden
s Film and woven bag
s Foam, fibres and composite materials
Cutting chamber:
- A ø 20 inch"
- B 29 ½ -37 ⅛ inch" 
Models: QE50100P