1. Max output: 700-1200 lbs/hr.
2. Cutting chamber: 18.90 × 14.17 inches.
3. Screen size: 0.39 inch.
4. Robust Construction for a long operating life.
5. Low noise level - Low Dust Generation on engineered plastics.
QE Series Granulators
Type |
|
QG4050 |
Motor Power |
HP |
20 |
Rotating speed |
Rpm |
530 |
Material of blades |
|
SKD-11 |
Quantity of Rotating Blades |
Pcs |
3 × 8 |
Quantity of Fixed Blades |
Pcs |
2 × 2 |
Cutting chamber |
inch |
18.90 × 14.17 |
Max. Output |
lbs/hr |
700-1200 |
Regrind Conveyor |
|
o |
Cooling Device |
|
√ |
Full-receiver alarm device |
|
o |
Feed hopper with magnet |
|
o |
Dust separator |
|
o |
Weight |
lbs |
2400 |
Screen size |
inch |
0.39 |
Dimensions |
inch |
61.42 × 37.8 × 71.97 |
Voltage |
440V/460V/480V, 3 phase, 60 Hz Options: 110V/220V/380V/400V, 3 phase, 50 Hz |
Features:
· The whole machine is made of stainless steel.
· Its compact and sturdy construction decides its function would not be affected by long term usage.
· Heavy burden type bearing with oil-sealed device and soundproof ply can keep the unit from shocking and noise, and prevent the material from pollution.
· Equipped with protective device for motor and chained power-off system to ensure safe operation, and also equipped with protective device for the safe cleaning.
· Blade are made of imported material, SKD11, through special manufacture process and heat treatment, the blades become more durable.
· Special claw and paddle blade designs can crush any hard or soft material extremely easier.
· Adjustable blade can be sharpened up while blunt and reused to prolong its life.
· The separation design of the crushing chamber and material bin allows the mesh screen to discharge and clean easily.
· Up QE4050 has a unique cooling water cycle system, which transfers the heat produced to outside area,can prevent granulated material from lumping efficiently.
. Crush blocking, film, special QSS,QSA,QSD shredders to choose .
Optional Features
s Conveyor belt
s Full-receiver alarm device
s Feed hopper with magnet
s Dust separator
s Air blower
Typical Applications
s Injection molded runners and reject parts
s Blow-molded parts and tops/tails
s Extruded tubes and profiles
s Edge trims from sheet extrusion
s Wooden
s Film and woven bag
s Foam, fibres and composite materials
Cutting chamber:
- A ø 16 inch
- B 19 ½ -26 ⅛ inch
Models: QG4050