About this product
1. High corrosion resistance coated steel plate.
2. Heat dissipation copper coil.
3. Use large flow pump.
4. Advanced aluminum alloy low noise.
5. Energy saving and high efficiency motor.
Cooling towers are heat-transfer units, used to remove heat from any water-cooled system. The cooled water is then re-circulated (and thus, recycled) back into the system.
While the most common usage of cooling towers has traditionally been in the air conditioning industry, companies that can benefit from cooling tower technology are hardly limited to this area. Industries such as plastics, dry cleaning, and more all rely on cooling towers to remove heat from the environment or equipment.
Circulating water quantity | GPM | 44.03 |
Dimension( L x W x H ) | Inch | 43 x 43 x 90.5 |
Warm water inlet pipe | I - 1 | DN50 |
Cold water outlet pipe | 0 - 1 | DN50 |
Spilled water pipe | O | DN50 |
Drainage water pipe | D | DN25 |
Automatic water pipe | A | DN25 |
Manual water pipe | M | DN25 |
Motor power | HP | 1 |
Secondary side cooling water pump motor power | HP | 1/2 |
Pressure | Kpa | 62 |
Empty weight | Lbs | 1102 |
Operating weight | Lbs | 2535 |