5HP Industrial Water Cooled Chiller

About this product

1. Cooling Capacity: 13500 Kcal/h (53568 BTU/h)

2. Power Supply: 220V 60Hz 3PH

3. Compressor Power: 3-3/4kW

4. Refrigerant: R-407c

5. Temperature Setting Range: 41~86 ℉

6. Chilled water Volume: 44-1/2 GPM

7. Cooling water Volume: 55-1/2 GPM

Introduction of IRUI series industrial chillers

Chiller, in the industryis divided into two types of air-cooled chiller andwater-cooled chiller, chiller in temperature controlis divided into lowtemperature chiller and room temperature chiller, roomtemperature temperature is generally controlled in the range of 41℉-95℉ degrees.Cryogenic machine temperature control in the general 41℉ - minus 45℉ degrees.Below small make up to introduce to everyone he has what characteristics!

1. Stable performance: multiple compressors are used in parallel, and each compressor has an independent refrigerationcircuit, that is, evaporator and condenser are completely independent;All compressor by unified command, microcomputer control systemone by oneopen and shut down, will not interfere with each other between each other, plusthe name-brand computer are all made of home furnishings, single machine failure rate is extremelylow, integrated the above reasons, to ensure that the howhighly stable performance, in the long run to run of the first case, and no need to buy other spare machine.

2. Power saving and energy saving: multiple small and medium power compressors are used in parallel, with minimal interferenceto the power grid when they are turned on or off. As the loadchanges, the unit will

automatically determine the number of power on, so as to ensure that the opened compressor is in working state, thuseffectively saving electric energy.

3, longservice life: evaporator, condenser design is very reasonable, and placed above the compressor, in the whole operation process, most of the lubricating oil always stay in the compressor, to ensure the good lubrication of the compressor. Scope of application: plastic products, hardware, chemicalindustry, electronics, food preservation, laser engraving,vacuum coating, ultrasoniccleaning;High power chillers are widely used in hotels, office buildings for central air conditioning, plasticcooling, food preservation, bath cooling, medical storage and other industries.

compressor expansion valve PUMP

Adopt Americangrain The use of Emerson thermal High flow centrifugal pump,

wheel fully closed scroll expansion valve stable high pressure, highflow,

compressor, long service and reliable performance. low noise, high stability.

life, large refrigerating

capacity, stable

and reliable.

Technical Details	Model HRI-05WCI-220V
Nominal Cooling Capacity (BTU/H)	(53568 BTU/h)
Power Supply	220V 60Hz 3PH
Full Load Amps (A)	30
Ambient Temperature (℉)	≦ 104
Temperature Setting Range (℉)	41 - 86
Compressor Type	All-close Scroll
Compressor Power (kW)	3-3/4
Compressor Quantity	1
Water Flow Regulator	Thermal expansion valve
Chilled Water Flow (GPM)	44-1/2
Chilled Water Pressure (PSI)	5-3/4 - 14-1/2
Cooling Water Flow (GPM)	55-1/2
Cooling Water Pressure (PSI)	4-1/2 - 8-3/4
Water Pipe Diameter (inch)	1
Refrigerant	R-407C
Refrigerant Filling Amount(lb）	7-1/4
Water Pump Power (kW)	1/2
Water Pump Head (ft)	25
Water Pump Quantity	1
Water Tank Capacity (us gal)	15-3/4
Dimensions (L x W x H) (inch)	43-1/42643-1/4
Gross Weight (lb)	882

0 reviews / Write a review

{{ item.label }}: {{ selectSpec[item.code]?.label }}

5HP Industrial Water Cooled Chiller 220V 3-P

Model #: 586WEA69
Availability: Out of stock

$3,999.99

Qty

0 reviews / Write a review

Write a review

5HP Industrial Water Cooled Chiller 220V 3-P

$3,999.99