877-888-5910
Foreign Trade Zone B2B
About this product

1. Cooling Capacity: 12900 Kcal/h ( 51180 BTU)

2. Refrigerant: R-407C

3. Water Pump Power: 1/2 KW ( 3/4 HP)

4. Inlet/Outlet Connection: 1"

5. Lowest Temp Setting: 41°F (5°C)

6. Water Tank Capacity: 200 L ( 52 gal).

Introduction of IRUI series industrial chillers


Chiller, in the industryis divided into two types of air-cooled chiller and water-cooled chiller, chiller in temperature control is divided into low temperature chiller and room temperature chiller, room temperature is generally controlled in the range of 41℉-95℉ degrees. Cryogenic machine temperature control in the general 41℉ - minus 45℉ degrees. Below small make up to introduce to everyone he has what characteristics!

1. Stable performance: multiple compressors are used in parallel, and each compressor has an independent refrigeration circuit, that is, evaporator and condenser are completely independent; All compressor by unified command, microcomputer control systemone by one open and shut down, will not interfere with each other between each other, plus the name-brand computer are all made of home furnishings, single machine failure rate is extremely low, integrated the above reasons, to ensure that the howhighly stable performance, in the long run to run of the first case, and no need to buy other spare machine.

2. Power saving and energy saving: multiple small and medium power compressors are used in parallel, with minimal interferenceto the power grid when they are turned on or off. As the loadchanges, the unit will
automatically determine the number of power on, so as to ensure that the opened compressor is in working state, thus effectively saving electric energy.

3, Long service life: evaporator, condenser design is very reasonable, and placed above the compressor, in the whole operation process, most of the lubricating oil always stay in the compressor, to ensure the good lubrication of the compressor. Scope of application: plastic products, hardware, chemicalindustry, electronics, food preservation, laser engraving,vacuum coating, ultrasoniccleaning; High power chillers are widely used in hotels, office buildings for central air conditioning, plasticcooling, food preservation, bath cooling, medical storage and other industries.

                                                                       

compressor                                                                                expansion valve                                                                         PUMP

Adopt Americangrain                                                        The use of Emerson thermal                                        High flow centrifugal pump,

wheel fully closed scroll                                                    expansion valve stable                                                   high pressure, highflow,

compressor, long service                                                  and reliable performance.                                            low noise, high stability.

 life, large refrigerating

 capacity, stable

 and reliable.

ITEM UNIT Model HRI-05ACI-220V
Cooling Capacity Kcal/h 12900
BTU/h 51180
Compressor All-closed Vorticity
Compressor Power KW 3-3/4
HP 5
Refrigerant R407C
Chilled Water Pump Power KW3/4
HP 1
Max Flow Rate of Chiller Water L/min 106
gal/min 30-1/2
Max Pressure m 25
ft 88
Flow Water Inlet and Outlet Pipe inch 1"
Cooling Fan Power KW1/2
HP 3/4
External Dimensions(L*W*H) mm 1300*650*1100
inches 51*26*43
Water Tank Capacity L 88
gal 23-1/4
Gross weight kg 240
lbs 529
Voltage

b. 220V ± 10% ,3 phase, 60 Hz;

 

Write a review

Please login or register to review

0 reviews / Write a review

{{ selectSpec[item.code]?.label }}

5HP Air-cooled Industrial Chiller 220V 3-P 60HZ

  • Model #: PWW1JK2J
  • Availability: Out of stock

  • $4,299.00


0 reviews / Write a review

Website Security Test