Auger Elevator Screw Conveyor Feeder With 100L Capacity Hopper 220V 3Phase 22Gal Capacity Hopper| Toolots

About this product

1. Material: 304 stainless steel

2. Hopper capacity: 22Gal (100L)

3. Feeding height: 78.75" (2000mm)

4. Voltage: 220V, 60Hz, 3 phase

5. Can be used with an powder packing machine.

Working Principe

When the screw rotates, the conveying of the raw material is completed with the help of the propelling action of the blade, the gravity of the material itself and the friction between the raw material and the inner wall of the material pipe.

Application

It is suitable for the conveying and lifting of powdered and fine-grained materials such as coffee powder, milk powder, spice powder, matcha powder, flour, detergent powder, veterinary medicine, pesticides, food additives, etc.

Machine Material

The main body of the machine (steel pipe part and hopper part) is made of 304 stainless steel, which is strong and firm, not easy to corrode. It has a long service life, and is easy to clean and maintain.

Hopper

The capacity is 100L (22Gal). The square hopper has high stability. The bottom of the bracket is equipped with a universal moving wheel, which can move freely.

Hopper Cover

The hopper is equipped with a removable cover that can be folded on both sides. There are two buckles on two each side for securing, making the lid not easy to dislodge. The cover can effectively prevent dust and prevent contamination of materials. There is also an observation port on the lid, which is convenient for observing the situation in the hopper.

Steel Pipe

The seamless steel pipe is no splicing with beautiful appearance. According to specific needs, the tilt angle can be adjusted freely. The structure is simple and the parts are few, which makes the disassembly of the steel pipe easy.

Spiral Blade

The blade clearance is small, and the thickened helical blade makes the material lift fast, thereby increasing the working efficiency. The spiral blade can be reversed for discharging, and the whole spiral blade can be easily taken out and cleaned.

Discharge Port

There is a discharge port at the lower end of the steel pipe for discharging. The screw cap design is convenient for cleaning materials, and it is not easy to block materials.

Technical Parameter

Hopper Capacity	22Gal (100L)
Feeding height	78.75" (2000mm)
Voltage	220V, 60Hz, 3 phase
Power	1.5KW
Machine Size	88.60"x28.35"x78.75" (2250x720x2000mm)
Machine Net Weight	220.5lbs (100kg)

0 reviews / Write a review

{{ item.label }}: {{ selectSpec[item.code]?.label }}