A. Cappingmachine control button.
B. Capping machinetouch screen, controlling operation interface.
C. Canpositioning plate.
D. Machinecapping head assembly, with motor rotating clockwise.
E. Machinemodel barcode.
F. Cappingmachine scavenge port.
G. Compressedair pressure regulator: This regulator shows the applicable pressure forcylinder valve is 50.8-58PSI (0.35-0.4Mpa).
H. Power supplyvoltage: The machine adopts three-phase 220V 60HZ power supply voltage.
I. Compressedair source pressure: Connect compressed air with 10mm diameter air pipe andinsert and connect firmly with this interface, which is used to control thecylinder pressure of capping machine, and adjust the air source pressure to 58-72.5PSI (0.4-0.5Mpa).
J. Spin Bfastens retaining nut.
K. SpinB: Loosen J, and then Spin B can adjust the distance from top to bottom.
L. EZOcrowner head.
M. Spin A: Loosen N, and then Spin A canadjust the distance from top to bottom.
N. Spin Afastens retaining nut.
Machine Dimensions | 21.6inch19.68inch×57inch(550mm×500mm×1450mm) |
Maximum Cylinder Stroke | 2.95inch (75mm) |
Net Weight | 154lb(70kg) |
Seal-capping type | Rotary type |
Production Capacity | 300-400 Cans/Hour |
Applicable Scope | 330 ml / 500 ml Cans |
Cylinder Valve Pressure | 58~72.5PSI (0.4~0.5Mpa) |
Power Voltage | 3-phase 220V 60Hz |