– Total suction lift up to 7 mt.
– Continuous duty
SPERONI peripheral 0.8 HP, 110/220V, 12.0/4.0 Amp, Single Phase 60HZ, 1″ Inlet/Outlet
APPLICATION
Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves.
They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.
For the correct functioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid impurities.
KPM80 – 0.8HP
Peripheral pump ideal for supplying water for domestic and irrigation applications.
PERFORMANCE
- Max Head: 180.5 ft
- Flow: 13.2 GPM
OPERATING CONDITIONS
– Liquid temperature up to 35°C (for home use according to EN 60335-2-41)
– Temperature max. liquid: 60°C (for other uses)
– Ambient temperature up to 40°C
– Total suction lift up to 7 mt.
– Continuous duty
MOTOR
– Two-Pole induction motor (n = 3450 min-1)
– Insulation Class F
– Protection IP 44
MATERIALS
– Pump body: Cast Iron
– Motor Support: Cast Iron
– Impeller: Brass
– Shaft with rotor: Stainless Steel AISI 304
– Mechanical seal: Ceramic/Graphite/NBR
– Mechanical seal: (KPM 70) Graphite/Silicon/NBR
