1. WEISS heavy class milling machine for more rigidity and greater cutting ability.
2. Larger travels and work area with 9-1/2" x 32" worktable
3. Big powerful 2 HP (1500W) with R8 spindle taper
4. Six speeds gear drive system with 90-1970 RPM speed, provides easy and reliable operation
5. Super-rigid precision-ground dovetail headstock column and table ways, precision handwheel control for X, Y, and Z-axis
6. All leadscrews are true inch pitch screws, larger dials with 0.001" graduate for easier reading
Want TOP quality? Come to WEISS, you can get the excellent value!
WMD45 Toolbox
· WMD45 Heavy-Duty Mill/Drill with tapping function
· Spindle is supported by high-precision P5 spindle bearings
· Spindle movement can be monitored on depth ruler in both inch or metric way
· WMD45 precision manual fine down feed can be adjusted with the min. feed rate up to 0.001"
· Six speeds gear drive system provides larger torque and easy operation.
· Gearbox levers make it chang spindle speeds fast and easily.
Reversible spindle & tapping controls
Mill head can be tiltled 45 degrees
Loosen the nuts and the bolt to adjust the mill head angle
All leadscrews are true inch pitch screws. Large dials with 0.001" graduation for easier reading
One year warranty which covers parts and assures the unit from factory defects. Professional technical support from WEISS factory!
WEISS, MAKE IT EASY!
| Model | WMD45 | |
| Max. Drilling Capacity | 45 mm | 17-3/4" |
| Max. End Milling Capacity | 32 mm | 1-1/4" |
| Max. Face Milling Capacity | 80 mm | 3-3/16" |
| Table Size | 800 x 240 mm | 31-1/2" x 9-1/2" |
| Cross Travel | 230 mm | 9" |
| Longitudinal Travel | 560 mm | 22" |
| Spindle Taper | R8 | |
| Vertical Travel | 300mm | 11-7/8" |
| Spindle Stroke | 120 mm | 4-3/4" |
| T-slot | 3 x 14 mm | 1/8" x 9/16" |
| Step of Spindle Speeds | 6 | |
| Range of Spindle Speeds | 90 - 1920 RPM | |
| Head Tilt | 45 degrees left & right | |
| Distance from Spindle to Column | 260 mm | 10-1/4" |
| Distance from Spindle Nose to Table | 470 mm | 18-1/2" |
| Motor | 1.5KW | 2Hp |
| Power Requirement | Single Phase 110V 60Hz | |
| Rated Current | 10A | |
| Packing Size | 57" x 28.3" x 27.5" | |
| Net Weight | 540 lbs | |
| Gross Weight | 576 lbs | |
STANDARD EQUIPMENT:
- Keyless Drill chuck capacity 5/8" with B16 taper
- Drill chuck arbor R8/B16
- Spindle sleeve R8/MT3
- Spindle sleeve MT3/MT2
- 7/16"-20 Drawbar
- Toobox & tools
- Technical documentation
