WEISS Variable Speed 27-1/2" × 7" Drill Mill Brushless Motor 1.5HP

About this product

1. Table size: 27-9/16" × 7-3/32"

2. Table travel: 18-57/64" × 5-1/2"

3. Max. drilling capacity: 1"

4. R8 spindle

5. Power: single phase 110V 1.5HP

6. Absolute operating silence (no gear)

7. Digital display RPM

8. electronic ruler display spindle feed

1. Variable speed enables to operate easily.

2. Spindle is supported by high precision taper roller bearing.

3. Single speed belt drive provide more quiet and easy operation.

4. Mill head can be tilled 90 degree

5. Bigger table provides more capacity.

6. The dovetail rails are equipped with adjustable taper inserts for greater wear resistance.

7. Precision manual fine down feed.

8. An electronic ruler is used for the spindle depth, accurately drilling, the minimum counting depth is 0.00004" or 0.001mm.

9. The feed length of the spindle can be precisely adjusted with the minimum feed rate up to 0.0008" or 0.02mm.

10. Minimum scale for hand wheel 0.002".

11. Direct transmission by toothed belt.

Model	VM25L-DRO
Max. Drilling Capacity	1"	25mm
Max. End Milling Capacity	5/8"	16mm
Max. Face Milling Capacity	2-1/2"	63mm
T-Slot Size	3 @ 15/32" slots	3 @ 12mm slots
T-Slot Centers	2-1/2"	63mm
Table Size	27-9/16" × 7-3/32"	700 × 180mm
Table Travel (X, Y)	18-7/8" × 5-1/2"	480 × 140mm
X/Y-Axis Travel per Handwheel Revolution	0.1"
Spindle Stroke	1-31/32"	50mm
Distance from Spindle to Column	7-1/2"	190mm
Distance from Spindle nose to table	12-19/32"	320mm
Spindle Drawbar Thread Size	7/16"
Spindle Drawbar Length	9-1/5"
Head Tilt (Left/Right)	90 Deg.
Spindle Taper	R8
Number of Spindle Speeds	Variable
Vertical Spindle Speeds	100 - 2250 RPM
Motor Type	Brushless 1.5HP
Power Requirement	Single Phase 110V 60Hz
Rated Current	10A
Packing Size	27-1/2" × 29-1/8" × 35-13/16"
Net Weight	275.6 lbs.
Gross Weight	297.7 lbs.