1. WEISS VM32L provides much larger travels and work area
2. Big powerful 2 HP (1500W) Brushless DC Variable Speed Motor
3. Single speed tooth belt driving system with 100-2250 RPM speed, provides easy and reliable operation, super silence runnning
4. Super-rigid precision-ground dovetail headstock column and table ways, precision handwheel control for X, Y, and Z-axis
5. All leadscrews are true inch pitch screws, larger dials with .002" graduate for easier reading
Want TOP quality? Come to WEISS, you can get the excellent value!
1. Variable speed enables to operate easily.
2. Spindle is supported by high precision taper roller bearing.
3. Single speed belt drive provide more quiet and easy operation.
4. Mill head can be tilled 90 degree
5. Bigger table provides more capacity.
6. The dovetail rails are equipped with adjustable taper inserts for greater wear resistance.
7. Precision manual fine down feed.
8. An electronic ruler is used for the spindle depth, accurately drilling, the minimum counting depth is 0.00004" or 0.001mm.
9. The feed length of the spindle can be precisely adjusted with the minimum feed rate up to 0.0008" or 0.02mm.
10. Minimum scale for hand wheel 0.002".
11. Direct transmission by toothed belt.
· Variable speed enables to operate easily
· Spindle is supported by high precision taper roller bearing
· Spindle RPM can be monitored on the digital readout.
· Spindle movement can be monitored on depth ruler in both inch or metric way
· VM32L has 2 HP POWERFUL brushless motor with silent running. Compare to old DC motor with brush, no need to change the carbon brush any more.
· High quality electronics used throughout machine for long term reliability
· Brushless motors has high efficiency, low noise (quiet), smooth operation, long life, low maintenance costs. Especially with low energy consumption brings better economic benefits to users
· Precision manual fine down feed can be adjusted with the min. feed rate up to 0.002"
· A clear chip guard with switch-off function on the spindle keeps debris from flying at the operator.
The dovetail rails are equipped with adjustable taper inserts for greater wear resistance
· VM25L features tapered gibs with double locks which adds accuracy and rigidity
Dovetail column
Mill head can be tiltled 90 degrees
· Loosen three nuts and one bolt to adjust the mill head angle
3-Axis DRO with magnetic scales
All leadscrews are true inch pitch screws. Large dials with .002" graduation for easier reading
One year warranty which covers parts and assures the unit from from factory defects. Professional technical support from WEISS factory
| Model Number | VM32L-D |
| Item Number | 10203325 |
| Max. Drilling Capacity | 1-1/4" |
| Max. End Milling Capacity | 3/4" |
| Max. Face Milling Capacity | 3" |
| Spindle Stroke | 2-3/4" |
| Rang of Spindle Speeds | Variable 100-2250 rpm |
| Taper of Spindle | R8 |
| Drawbar | 7/16"-20 |
| Max. Distance Spindle to Table | 18-1/2" |
| Max. Distance Spindle to Column | 8-1/4" |
| T-Slot Size | 3 @ 9/16" |
| T-Slot Centers | 2-1/2" |
| Table Size | 33" x 8 - 1/4" |
| Cross Travel (Y-Axis) | 8-5/8" |
| Longitudinal Travel (X-Axis) | 22-1/2" |
| Vertical Travel (Z-Axis) | 18-1/2" |
| Table Leadscrew Pitch | 10 TPI (.100" Per Turn) |
| Headstock Tilt Lef&Right | ±90° |
| Motor Power (Brushless type) | 2 HP |
| Power requirement | Single Phase 110V 60Hz |
| Packing Size | 45-1/4" x 27-3/8"x44-7/8" |
| Net Weight | 490 lbs |
| Gross Weight | 552 lbs |
STANDARD EQUIPMENT:
- Drill chuck with key capacity 5/8" with JT33 taper
- Drill chuck arbor R8/JT33
- 7/16"-20 Drawbar
- Toobox & tools
- Technical documentation
- 3-Axis DRO system with magnetic scales & 7" true color LCD screen
