1. Table size: 27-9/16" × 7-3/32"
2. Table travel: 18-57/64" × 5-1/2"
3. Max. drilling capacity: 1"
4. R8 spindle
5. Power: single phase 110V 1.5HP
6. Absolute operating silence (no gear)
7. Digital display RPM
8. electronic ruler display spindle feed
1. Variable speed enables to operate easily.
2. Spindle is supported by high precision taper roller bearing.
3. Single speed belt drive provide more quiet and easy operation.
4. Mill head can be tilled 90 degree
5. Bigger table provides more capacity.
6. The dovetail rails are equipped with adjustable taper inserts for greater wear resistance.
7. Precision manual fine down feed.
8. An electronic ruler is used for the spindle depth, accurately drilling, the minimum counting depth is 0.00004" or 0.001mm.
9. The feed length of the spindle can be precisely adjusted with the minimum feed rate up to 0.0008" or 0.02mm.
10. Minimum scale for hand wheel 0.002".
11. Direct transmission by toothed belt.
Model | VM25L-DRO | |
Max. Drilling Capacity | 1" | 25mm |
Max. End Milling Capacity | 5/8" | 16mm |
Max. Face Milling Capacity | 2-1/2" | 63mm |
T-Slot Size | 3 @ 15/32" slots | 3 @ 12mm slots |
T-Slot Centers | 2-1/2" | 63mm |
Table Size | 27-9/16" × 7-3/32" | 700 × 180mm |
Table Travel (X, Y) | 18-7/8" × 5-1/2" | 480 × 140mm |
X/Y-Axis Travel per Handwheel Revolution | 0.1" | |
Spindle Stroke | 1-31/32" | 50mm |
Distance from Spindle to Column | 7-1/2" | 190mm |
Distance from Spindle nose to table | 12-19/32" | 320mm |
Spindle Drawbar Thread Size | 7/16" | |
Spindle Drawbar Length | 9-1/5" | |
Head Tilt (Left/Right) | 90 Deg. | |
Spindle Taper | R8 | |
Number of Spindle Speeds | Variable | |
Vertical Spindle Speeds | 100 - 2250 RPM | |
Motor Type | Brushless 1.5HP | |
Power Requirement | Single Phase 110V 60Hz | |
Rated Current | 10A | |
Packing Size | 27-1/2" × 29-1/8" × 35-13/16" | |
Net Weight | 275.6 lbs. | |
Gross Weight | 297.7 lbs. |
STANDARD ACCESSORIES:
- Drill chuck with key capacity 1/64" to 25/64"
- Tool box
- Technical documentation