About this product
| 1,Motor: 3 HP |
| 2,Table size: 50 in. x 10 in. |
| 3,Longitudinal travel: 30 in, Cross travel: 14 in, |
| 4,Number of speeds: Variable |
| 5,Spindle taper: R-8 |
| 6,Max spindle to column: 27-1/2 in. |
| 7,Max spindle to table: 19-1/4 in. |
| 8,3-Axis DRO |
HT-4H002 10" x 50" Vertical Mill Turret Milling Machine 3 HP Variable-Speed with Power Feed and 3-Axis DRO
The 10" x 50" Vertical Mill with power feed and DRO is a full-featured mill built for those that have the use of three-phase power.
The headstock itself can rotate 90° left/right or tilt 45° forward/back so it can be positioned for nearly any setup needed. The ram rotates 360° around the turret and travels 18-1/2" forward or backward.
The milling machines feature 3-axis table movement with built-in longitudinal power feed. With the 10" x 50" table, you can set up a rotary table or another fixture on one side without having to remove your vise on the other.
Select spindle speeds between the 60–500 RPM low range and the 500–4200 RPM high range. Dial in your speed with the variable-speed handwheel and view it on the high-low range speed indicators.
Like all vertical milling machines, the comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.
The Customer Service and Technical Support Teams are U.S.-based.
HT-4H002
| Power supply: | 220V/440V, 3-phase |
| Motor: | 3HP, 220V/440V* (prewired for 220V), three-phase, 6.4A/3.2A |
| Spindle taper: | R-8 |
| Spindle speed: | Variable, 60–4200 RPM |
| Spindle travel: | 5" |
| Maximum distance spindle to table: | 19-1/4" |
| Table travel (longitudinal): | 30" |
| Table travel (across): | 14" |
| Table travel (vertical): | 15" |
| Table size: | 10" x 50" |
| T-slots: | 3 @ 2-1/2" centers, 5/8" wide |
| Head ram travel: | 18-1/2" F/B |
| Head tilt: | 90° L/R, 45° F/B |
| Turret/column swivel: | 360° |
| Drilling capacity for steel: | 1-1/4" |
| End milling capacity: | 1" |
| Face milling capacity: | 3" |
| Footprint: | 48" x 33" |
| DRO: | 3-Axis DRO |
| Max Distance Spindle to Column: | 27-1/2 in. |
| Longitudinal Leadscrew (X-Axis): | 52 in. |
| Drilling Capacity for Cast Iron: | 1-1/2" |
| Table Thickness: | 4-1/8 in. |
| X/Y-Axis Travel per Handwheel Revolution: | 0.200 in. |
| Quill Diameter: | 3-5/16 in. |
| Quill Feed Rates: | 0.0015, 0.003, 0.006, in./rev. |
| Drawbar Thread Size: | 7/16-20 |
| Drawbar Length: | 18-1/2 in. |
| Spindle Bearings: | Angular Contact Bearings |
| Overall shipping dimensions: | 65" W x 61" D x 88" H |
| Approximate shipping weight: | 2645 lbs. |
| Spindle Housing/Quill: | Cast Iron |
| Table: | Cast Iron |
| Head: | Cast Iron |
| Column/Base: | Cast Iron |
| Base: | Cast Iron |
| Paint Type/Finish | Enamel |