About this product
1. Max. drilling capacity: 1''
2. Table size: 27-9/16" × 7-3/32"
3. Motor: 3/4 HP, 110V, single-phase, 10A
4. Spindle taper: R8
▪ Feed spindles can be adjusted without clearance due to adjustable spindle nuts
▪ Stable dovetail guiding precision ground and scraped with adjustable V-ledges without
clearance
▪ EMC filter (to protect sensitive electronics for override mains-borne signals)
▪ Spindle is supported by high precision taper NSK bearing
▪ Drilling Milling head rotation by ±90°for milling and drilling works at different angles
▪ Height adjustable protective screen with micro switch providing maximum protection of the user against chips and parts flying off at high speed
| MODEL | BT25V | ||||||||||
| Max. Drilling Capacity | 25mm / 1'' | ||||||||||
| Max End Milling Capacity | 20mm / 3/4" | ||||||||||
| Max. Face Milling Capacity | 63 mm / 2-1/2" | ||||||||||
| Table Size | 700 × 180mm / 27-9/16" × 7-3/32" | ||||||||||
| Table Travel (X,Y) | 480 × 175mm / 17-1/2" x 6-1/2" | ||||||||||
| T-Slot | 3 × 12 mm / 3 x 15/32" slots | ||||||||||
| Spindle Taper | R8 | ||||||||||
| Spindle Stoke | 50 mm / 2'' | ||||||||||
| Step Of Spindle Speeds | Variable speed | ||||||||||
| Angle Of Spindle Speeds | 20-2250rpm | ||||||||||
| Spindle Incline Angle | ±90 | ||||||||||
| Distance From Spindle Nose To Table | 270mm / 11'' | ||||||||||
| Motor | 750W / 3/4 HP, 110V, single-phase, 10A | ||||||||||
| Net/Gross Weight | 125/145 kg / 330 Ibs | ||||||||||
| Packing Size | 710 x 710 x 890mm |