Gear Drive Milling Machine With X,Y,Z Power Feeder ZX45A The Bolton Tools ZX45A bench top milling machine is loaded with features and a large table for a bench top mill. The ZX45A mill comes equipped with a 3 axis power feed for effortless rapid travel. The all gear drive system allows for tons of torque and power. The 2 HP motor and dove tail column combined with a 900 lb overall weight, make the ZX45A milling machine a precision focused machine tool.
The Bolton Tools ZX45A benchtop milling machine is loaded with features and a large table for a bench top mill.
The ZX45A mill comes equipped with a 3 axis power feed for effortless rapid travel. The all gear drive system allows for tons of torque and power. The 2 HP motor and dovetail column combined with a 900 lb overall weight, make the ZX45A milling machine a precision-focused machine tool.
The ZX45A has a digital display for the quil travel, and also comes with a tapping switch. This could be the last milling machine you ever need! Positive reviews and ease of use should encourage you to take a long hard look at the ZX45A milling machine.
SPECIFICATIONS
Shipping Weight: 871 lbs;
Machine Weight: 781 lbs;
Crate Size: 39'' x 40'' x 40'';
Work Area Requirements: 73'' x 50-1/2''
Length: 38-1/2'';Width: 55''; Height: 56''
Footprint: 25'' x 16''; T-Slot Size: 5/8'' Power feed (X-Axis): Yes
Power feed (Y-Axis): Yes
Power feed (Z-Axis): Yes (Head)
Table Size: 40'' x9 1/2''.
ELECTRICAL SPECIFICATIONS
AMP: 7; HP: 2; Motor Type: AC;
Phase: Single; Volt: 220 A/C
MILL/DRILL SPECIFICATIONS
Column: Dovetail Ways;
Dial Calibration Drill-Coarse Feed: 0.045'';
Dial Calibration Mill-Fine feed: 0.001''
Dial Calibration X-Axis: 0.001'';
Dial Calibration Y-Axis: 0.001''
Draw Bar thread 7/16''-20
Drill Chuck Arbor: R8/JT3;
Feed Rate (X-Axis): .945-3.307''
Feed Rate (Y-Axis): .945-3.307''
Feed Rate (Z-Axis): .0024-.0118''
Rotating Mill Head: 90°(Left and Right)
Head Travel: 16-1/4''
Quill Diameter: 3''
Quill Travel: 5''
Spindle Center to Column: 11''
Spindle to Table (Distance): 0'' to 16-1/4''
Spindle Speeds: 95, 175, 310, 450, 850, 1500
Spindle Taper: R8
TOOL SIZE LIMITS
Drill Capacity: 1''
Face Mill Capacity: 3''
End Mill Capacity: 1''
Tapping Capacity: 1/2''
X-Axis Travel: 25''; Y-Axis Travel: 6-3/8''