Made in Taiwan
1. Work Radius: 3 ³⁵/₆₄" - 38 ³⁷/₆₄" / 90-980mm
2. Quick position
3. No breakage, even for blind hole
4. High accuracy thread
5. Voltage: 220V 50/60Hz
About US
Lantech Industrial Co., Ltd. was established in 1986 and is an expert in induction heating and tapping machine equipment in Taiwan. Precision and maximum efficiency have always been our goals. Over the past 20 years, we have provided countless induction heating machines and electrical equipment for a wide range of applications in Taiwan's metal industry.
In 1995, We began to use transistor induction heating to replace the traditional vacuum tube induction heating. We were surprised that the heating efficiency was increased by 30-40%, the lifespan was increased by 2 times, and the weight and volume were reduced by half. Achieve the eternal pride of Lantech Industry.
Our most advanced transistor induction heating machine can heat various materials without touching the workpiece. It heats the iron, steel, alloy steel, stainless steel, titanium, aluminum, copper, bronze, brass, graphite, and other materials and has been widely used in hardening, annealing, tempering, forging, silver soldering, melting, thermal Shrink fit, iron pipe welding, PVC, ABC plastic implants in metal and various other uses.
Key Features
● Consumption:
Electric tapping machine→1/5
Pneumatic Tapping Machine → 4/5
Electric tapping machine consumes less than pneumatic tapping machine
● The maintenance rate of the air compressor is low
● Low noise
● Vertical/horizontal tapping equipment
● High rigidity
● Stepless speed change: The speed can be modulated step-less by 1/3 of the listed speed without reducing torque
● Voltage: 220V 50/60Hz
Quality Guarantee:
We use high-quality Italy-made torque limited tap holders and Japan-made self-lubricant bush providing precision and longer life.
Standard Accessories:
- Tapping Arm
- Electric control system
- Electric motor with Quick change chuck #1
- Depth Control device
Optional Accessories:
- Vertical/Horizontal head
- Vertical/Horizontal/Angular tapping head
- Magnetic Base 300kg (the Parallel arm will be paralleled, not inclined an angle)
- Depth Control Device
Note: The suitable sizes of tap holders are available for purchase.
Specifications:
| Tap | Speed (RPM) | Power |
| 1/8 - 5/16 | 840 | 400W |
| Work radius | 3 ³⁵/₆₄" - 38 ³⁷/₆₄ / 90-980mm |
| Net Weight | 18 kg/ 39.68 lbs |
| Gross Weight | 19 kg/ 41.89 lbs |
| Packing Dimension | 800 mm x 330 mm x 90 mm/ 31.5" x 12.99" x 3.54" |
Related Products
Torque Limited Tap Holders ANSI 9/16" Made In Taiwan
$22.00 $44.00
Torque Limited Tap Holders ANSI Nr6 Made in Taiwan
$21.25 $44.00