1. Electrode Diameter Range: 0.8 ~ 10mm (3/64" ~ 25/64")
2. Travel (Z): 70mm (27-9/16")
3. Max Processing Speed: 1mm/min (4/64"/min)
4. Remove Tap Size: 2 ~ 20mm (5/64" ~ 25/32")
1. EDMs abided by spark erosion principle is used to remove broken taps, reamers, drills, screws and so on.
2. Non-contact working leads to no damage to the work piece. It also can mark or process imprecise holes on conducting macterials.
3. This model could easily remove broken tap, broken bolt, broken screw sized (diameter) from 5/64" ~ 25/32".
4. Its Independent and magnetic work head with small size make it easy to work on large work piece.
5. Equipped with vibrate motor improves the processing efficiency.
6. Depth setting; Auto retract and alarm; Reset button.
Machine Details:
Package:
One set per carton, each set is packaged by inner carton and outer carton totally two layers. Inner carton is surrounded by PE foam to protact the machine, 5 packing belts tied up on the outer carton.
| Item | Unit | Spec. |
| Model No. | EDM-8C | |
| Input Voltage | V | AC110V 60HZ 1 Phase |
| Secondary Output Voltage | V | 10 ~ 70 |
| Electrode Diameter Range | mm | 1~10 |
| inch | 3/64 ~ 25/64 | |
| Travel (Z) | mm | 70 |
| inch | 2-3/4 | |
| Max Processing Speed | mm/min | 1 |
| inch/min | 3/64 | |
| Working Liquid | Tap water | |
| Remove Taps Size (Diameter) | mm | 2 ~ 20 |
| inch | 5/64 ~ 25/32 | |
| Machine Size (L × W × H) | mm | 380*160*300 |
| inch | 14-61/64 × 6-19/64 × 11-13/16 | |
| Package Size | mm | 498*308*392 |
| inch | 19-39/64 × 12-1/8 × 15-7/16 | |
| Net Weight | Kg | 16 |
| Lbs | 35.2 | |
| Gross Weight | Kg | 18 |
| Lbs | 39.6 |
