1. Used for 3 axis milling machine, 8 bits LED display.
2. Metric / British units switching.
3. ABS / INC coordinate conversion.
4. Can store 200 sets of auxiliary coordinate.
1. This DRO display is initially set for 3 axis milling machine.
2. An earth wire, mounting hardware, power plug, brackets and operation manual are included.
3. DRO must be kept dry or not be splashed directly by the cooling liquid.
4. It has many features:
Probe input
Programmable memory with graphical presentation
Touch probe input
Zeroing
Zeroing Reset
Metric/British units switching
1/2 function
Dimension input
ABS/INC coordinate conversion
Power off memory
Full zeroing of 200 sets SDM coordinate origins
Sleeping mode
Ruler storage function
Linear compensation
Non-linear compensation
200 sets of auxiliary coordinate
Parameters setting
Bevel punching function
Divide holes on Circumference ( PCD ) function
Arc machining function
Calculator function
Machine Compatibility | Milling |
Number of Axes | 3 |
Power Supply | AC80V-260V / 50HZ-60HZ |
Power Dissipation | 15W |
Working Tempeture |
14 °F~140 °F / -10 °C~60 °C |
Storage Temperature |
-22 °F~158 °F / -30 °C~70 °C |
Relative Humidity ( RH ) |
<90%(68±41°F) |
Input Signal Allowed by the DRO | TTL square wave |
Allowable Input Signal Frequency | < 2 MHz |
Operating Keyboard | Light touch buttons |
Programmable Memory | Yes |
Calculator Function | Yes |
Display Type | 8 bit display with signed |
Color Display | Yes |