1. Used for 2 axis lathe machine, 8 bits LED display.
2. Metric / British units switching.
3. ABS / INC coordinate conversion.
4. Can store 200 sets of auxiliary coordinate.
1. This DRO disply is initially set for 2 axis lathe machine.
2. An earth wire, mounting hardware, power plug, brackets and operation manual are included.
3. DRO must be kept dry or not be splashed directly by the cooling liquid.
4. It has many features:
Probe input
Programmable memory with graphical presentation
Touch probe input
Zeroing
Zeroing reset
Metric / British units switching
Dimension input
ABS / INC coordinate conversion
Power off memory
Full zeroing of 200 sets SDM coordinate origins
Sleeping mode
Ruler storage function
Linear compensation
Non-linear compensation
200 sets of auxiliary coordinate
Parameters setting
Diameter / radius conversion
Calculator function
Machine Compatibility | Lathe |
Number of Axes | 2 |
Power Supply | AC80V-260V / 50HZ-60HZ |
Power Dissipation | 15W |
Working Tempeture |
14 °F~140 °F / -10 °C~60 °C |
Storage Temperature |
-22 °F~158 °F / -30 °C~70 °C |
Relative Humidity ( RH ) |
<90%(68±41°F) |
Input Signal Allowed by the DRO | TTL square wave |
Allowable Input Signal Frequency | < 2 MHz |
Operating Keyboard | Light touch buttons |
Programmable Memory | Yes |
Calculator Function | Yes |
Display Type | 8 bit display with signed |
Color Display | Yes |