1. Max. Flow Speed: 590-35/64 in./s (15m/s)
2. Fluid conductivity: ≥ 5uS / cm
3. Operating Temperature: 14 °F to 140 °F ( -10°C to 60°C )
4. Enclosure Rating: IP65
5. Flow Range: 0-132GPM (0-30 m³ / h)
1. Measurement is not affected by the variation of flow density, viscosity, temperature, pressure and conductivity. High accuracy measurement is guaranteed according to the linear measurement principle.
2. It is widely used in the flow measurement and control in the fields of chemical and petroleum industry, metallurgy industry, water and wastewater, agriculture and irrigation, paper making, food and beverage industry and pharmaceutical industry.
3. No obstacle in the pipe, no pressure-loss and lower requirements for a straight pipeline.
4. Programmable low frequency square wave field excitation, improving measurement stability and reducing power consumption.
5. Implementing 16 bits MCU, providing high integration and accuracy; Full-digital processing, high noise resistance and reliable measurement; Flow measurement range up to 1500:1.
6. Intelligent empty pipe detection and electrodes resistance measurement diagnosing empty pipe and electrodes contamination accurately.
7. SMD component and surface mount technology (SMT) are implemented to improve the reliability.
8. Product components: sensor and converter.
TRANSPORTATION AND STORAGE
To prevent the flow meter from damage in the transportation, the package should be kept in unopened status before reaching installation site. The storage room should be satisfied with the following conditions:
a. Rain-proof, humidity-proof.
b. Strong Vibration and Shake Avoidance.
c. Temperature between -4 °F to 140 °F(-20°C to 60°C), relative humidity less than 80%.
Ambient temperature:
Sensor: -13°F to 140°F (-25°C to 60°C), converter: -13°F to 140 °F (-25°C to 60°C).
Relative humidity: 5% to 90%.
Find DN50 accuracy curve from the left image.
SKU | DN |
L (In./mm) |
W (In. / mm) |
H1 (In. / mm) |
H (In. / mm) |
DN |
D (In. / mm) |
d1 (In. / mm) |
d0 (In. / mm) |
n |
NBDS-BTLD-5001611102EH1MA | 50 | 7-7/8 / 200 | 6-59/64 /176 | 5-29/32 / 150 | 7- 33/64 / 191 | 50 | 5- 63/64 / 152 | 4-3/4 / 120.5 | 5/8 / 16 | 4 |
Measured | Liquid, Fluid |
Connection/Fitting | 150 lb. Flange |
Chamber( lining) Material | PTFE |
For Pipe Size | 2" |
Connecting Size | 2" |
Flange Material | Carbon steel |
Housing Material | Stainless steel 304 |
Electrode Material | Stainless steel 316L |
Accuracy | +/-0.3% (when flow speed>=39-3/8 in ./ s) |
+/- 7/64 in./s (when flow speed<39-3/8 in. / s) | |
Max. Flow Speed | 590-35/64 in./s (15 m / s) |
Flow Range | 0-132GPM (0-30 m³ / h) |
Maximum Operating Pressure | 232psi/1.6 MPa/16 bar |
Fluid Conductivity | ≥ 5u S/cm |
Operating Temperature | 14 °F to 140 °F ( -10°C to 60 °C ) |
Enclosure Rating | IP65 |
Power Supply | 1 phase 220 VAC, 45-63 Hz, ≤20 W |
Output Signal | Current 4-20 mA |
Digital Communication | HART |
What you can get from the carton?
1. Electromagnetic flow meter 1 unit.
2. Calibration Certificate 1 piece.
3. Certificate of Quality 1 piece.
4. User Manual 1 piece.
5. User's Manual--L-mag Electromagnetic Flow Meter Converter 1 piece.