About this product
Material: 23MnCrNiMo54 Hardness: HRC34-38
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015; EN 1677-4:2000/A1:2008
- Grade 100
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge alloy steel
Model | PA-UNC1/2" | Dimension D | 2-23/64" |
Dimension M | 1/2"-13 | Dimension F | 53/64" |
Dimension A | 35/64" | Dimension G | 2-7/16" |
Dimension B | 1-47/64" | Dimension T | 4-13/46" |
Dimension C | 1-29/64" | WLL | 2646 lbs |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
Lifting Method |
|
|
|
|
|
| |||||
Number of hanging point | 1 | 2 | 1 | 2 | 2 | 2 | 2 | 3-4 | 3-4 | 3-4 | |
lifting angle | 0° | 0° | 90° | 90° | ≤90° | 90-120° | ≤90° | ≤90° | 90-120° | ≤90° | |
Model | Thread Specification | working safety limit load (WLL) lbs | |||||||||
PA-UNC1/2" | 1/2"-13 | 2646 | 5291 | 1323 | 2646 | 1764 | 1323 | 1323 | 2646 | 1984 | 1323 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.