About this product
1. Turnbuckle Size (in.): 3/4×12
2. Pack of 1 PCS
3. Working Load Limited: 5200 lbs
4. Technology: Precision Cast
5. Surface: Polished
6. Material: Stainless Steel 304
1. Stainless Steel Turnbuckles Jaw and Jaw meets the design and performance requirements of federal specifications FF-T-791b, Type 1 Form 1-CLASS 7.
2. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles.
3. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace.
4. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line.
5. Turnbuckle Size (in.): 3/4×12; Working Load Limited: 5200 lbs; Pack of 1 PCS
| Size | A | B | E | G | J | K | M | N | BB | WLL | WT |
|---|---|---|---|---|---|---|---|---|---|---|---|
| inch | inch | inch | inch | inch | inch | inch | inch | inch | inch | lbs | lbs |
| 3/4×12 | 0.75 | 0.94 | 4.18 | 1.50 | 32.00 | 20.00 | 34.60 | 22.60 | 12.00 | 5200 | 6.18 |
* Please be aware that there may be deviation and tolerance in noted measurements.