About this product
Material: 42CrMoA Hardness: HRC38-42
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015; EN 1677-4:2000/A1:2008
- Grade 80
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge alloy steel
| Model | PE-UNC1" | Dimension D | 2-3/4" |
| Dimension M | 1"-8 | Dimension F | 1-37/64" |
| Dimension A | 25/32" | Dimension G | 3-5/64" |
| Dimension B | 2-43/64" | Dimension T | 6-27/64" |
| Dimension C | 1-21/32" | WLL | 14110 lbs |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
| Lifting Method |
|
|
|
|
|
|
|
|
|
| |
| Number of hanging point | 1 | 2 | 1 | 2 | 2 | 2 | 2 | 3-4 | 3-4 | 3-4 | |
| lift angle | 0 | 0 | 90 | 90 | ≤90 | 90-120 | ≤90 | ≤90 | 90-120 | ≤90 | |
| Model | Thread Specification | Work tension(working safety limit load WLL)lbs | |||||||||
| PE-UNC1" | 1"-8 | 14110 | 28220 | 7055 | 14110 | 9877 | 7055 | 7055 | 14110 | 10583 | 7055 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.