About this product
Material: 42CrMoA Hardness: HRC38-42
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015; EN 1677-4:2000/A1:2008
- Grade 80
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge alloy steel
| Model | PE-UNC1 1/4" | Dimension D | 3-9/64" |
| Dimension M | 1-1/4"-7 | Dimension F | 1-31/32" |
| Dimension A | 55/64" | Dimension G | 3-35/64" |
| Dimension B | 3-35/64" | Dimension T | 8-5/16" |
| Dimension C | 2" | WLL | 19842 lbs |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
| Lifting Method |
|
|
|
|
|
|
|
|
|
| |
| Number of hanging point | 1 | 2 | 1 | 2 | 2 | 2 | 2 | 3-4 | 3-4 | 3-4 | |
| lift angle | 0 | 0 | 90 | 90 | ≤90 | 90-120 | ≤90 | ≤90 | 90-120 | ≤90 | |
| Model | Thread Specification | Work tension(working safety limit load WLL)lbs | |||||||||
| PE-UNC1 1/4" | 1-1/4"-7 | 19842 | 39684 | 9921 | 19842 | 13889 | 9921 | 9921 | 19842 | 14882 | 9921 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.