About this product
Material: C20 Hardness: HRC38-42
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015; EN 1677-4:2000/A1:2008
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge low carbon steel
| Model | PD-UNC3/4" | Dimension M | 3/4" |
| Dimension D | 3/4"-10 | Dimension G | 39/64" |
| Dimension A | 1-37/64" | Dimension H | 2-51/64" |
| Dimension B | 2-53/64" | Dimension I | 13/64" |
| Dimension C | 1-37/64" | Dimension L | 1-3/16" |
| Dimension E | 35/64" | WLL | 2646 lbs |
| Dimension F | 5/8" | Country of origin | China |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
Lifting Method |
|
|
|
| |
| Number of hanging point | 1 | 2 | 2 | 2 | |
| Lifting angle | 0° | 0° | ≤90° | ≤90° | |
| Model | Thread Specification(mm） | working safety limit load(WLL）lbs | |||
| PD-UNC5/8" | 3/4"x10 | 2646 | 5292 | 2646 | 3704 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.