About this product
Material: 42CrMoA Hardness: HRC34-48
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge alloy steel
| Model | PC-UNC5/8" | Dimension M | 35/64" |
| Dimension D | 5/8"x11 | Dimension G | 1/2" |
| Dimension A | 1-3/8" | Dimension H | 2-31/64" |
| Dimension B | 2-31/64" | Dimension I | 5/32" |
| Dimension C | 1-3/8" | Dimension L | 1-1/16" |
| Dimension E | 15/32" | WLL | 1543 lbs |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
Lifting method |
|
|
|
| | |
| Number of hanging point | 1 | 2 | 2 | 2 | 3-4 | |
| lifting angle | 0° | 0° | ≤90° | ≤90° | ≤90° | |
| Model | Thread Specification(mm） | working safety limit load (WLL) lbs | ||||
| PC-UNC5/8" | 5/8"x11 | 6614 | 13228 | 6173 | 5952 | 8378 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.