About this product
Material: 42CrMoA Hardness: HRC34-48
Executive Standard: EN ISO 12100:2010; EN ISO 3266:2010/A1:2015
- CE CERTIFICATE
- 4 Times coefficient of safety
- Forge alloy steel
Model | PC-UNC1 1/4" | Dimension F | 61/64" |
Dimension D | 1 1/4"x7 | Dimension G | 1-5/64" |
Dimension A | 2-23/64" | Dimension H | 4-19/64" |
Dimension B | 4-1/4" | Dimension I | 9/32" |
Dimension C | 2-35/64" | Dimension L | 1-49/64" |
Dimension E | 55/64" | WLL | 24251 lbs |
Inspection Procedure
- Overall dimensions inspection according to acceptance criteria. No crack and defect, the marks of specification , supporting capacity and material on the surface should be clear.
- Test with thread ring gauge. Precision grade 6g(0.21OZ)
- Thread axis vertical to bearing surface, rotating the gauge to the screw root, if it's of seamless joint with bearing surface, then vertical qualified.
- Qualified hoist ring must offer the certificate or detailed examining report in written form, and keep in the archives.
|
|
|
|
| ||
Number of hanging point | 1 | 2 | 2 | 2 | 3-4 | |
lifting angle | 0° | 0° | ≤90° | ≤90° | ≤90° | |
Model | Thread Specification(mm) | working safety limit load (WLL) lbs | ||||
PC-UNC1 1/4" | 1 1/4"x7 | 24251 | 48502 | 22708 | 21605 | 30203 |
All are 4 times to the safety coefficient at all the lifting directions.
- Thread holes are deep enough to ensure that the bolt is fully screwed in
- bolt firmly fixed contact surface mount(with manual rotation, do not allow using tools to tighten)
- Equipment materials can withstand tension, will not deform.