1. Table Diameter : 7-7/8" (200mm), Gear Ratio: 90:1
2. Diameter of Center Hole: 55/64" (22mm), Center Taper MT3
3. Height of center for Vert. mounting: 5 - 5/16" (135mm)
4. Number of T-Slot: 4, Width of T-Slot: 35/64" (14mm)
1. Table Diameter: 7-7/8" (200mm), Center Taper MT3
2. Diameter of Center Hole: 55/64" (22mm)
3. Height of center for Vert. mounting: 5-5/16" (135mm)
4. Width of T-Slot: 35/64" (14mm). Adjacent angle of T-Slot: 90 degree
5. Width of locating key: 5/8" (16mm)
6. Indexing Accuracy: 45 sec., Vernier scale reading: 10 sec.
7. One rotation of the handle moves the table 4 degree
8. Gear Ratio: 90:1
9. Use on milling machines for circular cutting, angle settings, boring and spot facing, table surface and rotating parts are ground for smooth operation
| SKU | BD0301003 | Model | RT - HV8" | ||
| Table | D (mm/in.) |
200 7-7/8 |
Width of T-Slot |
e (mm/in.) |
14 35/64 |
| H (mm/in.) |
105 4-9/64 |
Type |  |
||
| Base Dimension | H1 (mm/in.) |
135 5-5/6 |
Bolt Slots | K (mm/in.) |
16 5/8 |
| A (mm/in.) |
265 10-7/16 |
Center Taper | MT3 | ||
| B (mm/in.) |
220 8-21/32 |
Gear Ratio | 90:1 | ||
| Meas | 15.7 × 14.6 × 7.5 in. |
| Net Weight | 62 lbs. |
| Gross Weight | 64 lbs. |
